Asodur-V360W Leistungserklärung GB_12.03.2014.pdf
2 Pages
71.1 KB
Download
<h1>Asodur-V360W Leistungserklärung GB_12.03.2014.pdf</h1> <p>Declaration of Performance <br />according Annex III oft he Regulation (EU) No. 305/2011</p> <p>for the product</p> <p>ASODUR-V360W <br />205056 <br />1.</p> <p>Unique identification code of the product type:</p> <p>EN 1504-2 Principle 5.1/6.1</p> <p>2. Identification :</p> <p>batch no.: see packaging of the product</p> <p>3. Intended use:</p> <p>EN 1504-2 <br />Survis protection product / coating</p> <p>4. Manufacturer :</p> <p>Schomburg GmbH & Co. KG <br />Aquafinstrasse 2-8 <br />32760 Detmold</p> <p>5. Authorized representative:</p> <p>not relevant</p> <p>6. System or systems of assessment and <br />verification of constancy of performance <br />of the construction product as:</p> <p>System 2+</p> <p>7. Notified test laboratory: <br />The notified testing laboratory KIWA <br />Polymer Institut,, identification number 1119 <br />performed the determination of the producttype on the basis of type testing under <br />system 2 + and issued: test report No <br />1119-CPD-13126. <br />8. Declared performance : <br />Essential characteristics <br />Water vapour permeability <br />Capillary water absorption and <br />water permeability <br />Pull off test for determination of <br />the adhesive strength <br />Abrasive resistance <br />Shock strength <br />Strong chemical attack resistance</p> <p>Reaction to fire <br />Dangerous substances</p> <p>Performance</p> <p>Harmonised technical <br />specification</p> <p>Class II <br />0,5</p> <p>w < 0,1 kg/m² x h</p> <p>≥ 1,5 (1,0) N/mm² <br />Lost of mass ≤ 3000 mg <br />Class I <br />Because of the slightly <br />thickness just visual <br />assessment according ISO <br />4628/1 is possible <br />Class E <br />According 5.3 <br />(EN 1504-2)</p> <p>EN 1504-2:2004</p> <p>The performance of the product identified in points 1 and 2 is in conformity with the declared <br />performance in point 8. This declaration of performance is issued under the sole responsibility of the <br />manufacturer identified in point 4. <br />Signed for and on behalf of the manufacturer by: <br />Michael Hölscher, technician <br />(name and function)</p> <p>Detmold, 12.03.2014</p> <p>This declaration of performance was created electronically. It is valid without manual <br />signature.</p> <p>The current material safety data sheet and technical data sheet is downloadable under <br />http://www.schomburg-ics.de/en/Materials_safety_Data_Sheet_MSDS-datenblaetter.html <br />or <br />http://www.schomburg-ics.de/en/Technical_Data_Sheet-datenblaetter.html</p>
