ASOFLEX-AKB_WAND_ _BODEN_(B-Komponente)_(15)EN.pdf
9 Pages
140 KB
Download
<h1>ASOFLEX-AKB_WAND_ _BODEN_(B-Komponente)_(15)EN.pdf</h1> <p>48.0.13</p> <p>Page 1/9</p> <p>Safety data sheet <br />according to 1907/2006/EC, Article 31 <br />Printing date 24.01.2019 <br />*</p> <p>Version number 15</p> <p>Revision: 24.01.2019</p> <p>SECTION 1: Identification of the substance/mixture and of the company/undertaking <br />· 1.1 Product identifier <br />· Trade name: ASOFLEX-AKB WAND + BODEN (B-Komponente) <br />· Article number: 550150810B <br />· 1.2 Relevant identified uses of the substance or mixture and uses advised against <br />No further relevant information available. <br />· Application of the substance / the mixture Hardening agent/ Curing agent <br />· 1.3 Details of the supplier of the safety data sheet <br />· Manufacturer/Supplier: <br />SCHOMBURG GmbH & Co. KG <br />Aquafinstr. 2-8 <br />D-32760 Detmold <br />Germany <br />---------------------------------------------Tel: ++49 (0)5231/953-00 <br />Fax: ++49 (0)5231/953-123 <br />email: info@schomburg.de <br />web: www.schomburg.de <br />· Informing department: <br />Product Safety Department <br />Tel: ++49 (0)5231/953-193 <br />Fax: ++49 (0)5231/953-106 <br />email: guido.herfort@schomburg.de</p> <p>*</p> <p>SECTION 2: Hazards identification <br />· 2.1 Classification of the substance or mixture <br />· Classification according to Regulation (EC) No 1272/2008 <br />GHS08 health hazard <br />Resp. Sens. 1 H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. <br />Carc. 2 <br />H351 Suspected of causing cancer. <br />STOT RE 2 H373 May cause damage to organs through prolonged or repeated exposure. <br />GHS07 <br />Acute Tox. 4 <br />Skin Irrit. 2 <br />Eye Irrit. 2 <br />Skin Sens. 1 <br />STOT SE 3</p> <p>H332 Harmful if inhaled. <br />H315 Causes skin irritation. <br />H319 Causes serious eye irritation. <br />H317 May cause an allergic skin reaction. <br />H335 May cause respiratory irritation.</p> <p>· 2.2 Label elements <br />· Labelling according to Regulation (EC) No 1272/2008 <br />The product is classified and labelled according to the CLP regulation. <br />· Hazard pictograms GHS07, GHS08 <br />· Signal word Danger <br />· Hazard-determining components of labelling: <br />diphenylmethane-4,4'-di-isocyanante <br />diphenylmethane-2,4'-diisocyanate <br />diphenylmethanediisocyanate,isomeres and homologues <br />diphenylmethane-2,2'-diisocyanate <br />(Contd. on page 2) <br />GB</p> <p>48.0.13</p> <p>Page 2/9</p> <p>Safety data sheet <br />according to 1907/2006/EC, Article 31 <br />Printing date 24.01.2019</p> <p>Version number 15</p> <p>Revision: 24.01.2019</p> <p>Trade name: ASOFLEX-AKB WAND + BODEN (B-Komponente) <br />(Contd. of page 1)</p> <p>· Hazard statements <br />H332 Harmful if inhaled. <br />H315 Causes skin irritation. <br />H319 Causes serious eye irritation. <br />H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. <br />H317 May cause an allergic skin reaction. <br />H351 Suspected of causing cancer. <br />H335 May cause respiratory irritation. <br />H373 May cause damage to organs through prolonged or repeated exposure. <br />· Precautionary statements <br />P260 <br />Do not breathe dust/fume/gas/mist/vapours/spray. <br />P280 <br />Wear protective gloves/protective clothing/eye protection/face protection. <br />P284 <br />[In case of inadequate ventilation] wear respiratory protection. <br />P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact <br />lenses, if present and easy to do. Continue rinsing. <br />P405 <br />Store locked up. <br />P501 <br />Dispose of contents/container in accordance with local/regional/national/ <br />international regulations. <br />· Additional information: <br />Contains isocyanates. May produce an allergic reaction. <br />· 2.3 Other hazards <br />· Results of PBT and vPvB assessment <br />· PBT: Not applicable. <br />· vPvB: Not applicable. <br />*</p> <p>SECTION 3: Composition/information on ingredients <br />· 3.2 Chemical characterisation: Mixtures <br />· Description: Preparation based on Diphenylmethan-Diisocyanat-Prepolymers. (MDI) <br />· Dangerous components: <br />CAS: 101-68-8 <br />25-50% <br />diphenylmethane-4,4'-di-isocyanante <br />EINECS: 202-966-0 <br />Resp. Sens. 1, H334; Carc. 2, H351; STOT RE 2, H373; <br />Acute <br />Tox. 4, H332; Skin Irrit. 2, H315; Eye Irrit. 2, H319; Skin Sens. 1, H317; <br />STOT SE 3, H335 <br />CAS: 5873-54-1 <br />diphenylmethane-2,4'-diisocyanate <br />25-50% <br />EINECS: 227-534-9 <br />Resp. Sens. 1, H334; Carc. 2, H351; STOT RE 2, H373; <br />Acute <br />Tox. 4, H332; Skin Irrit. 2, H315; Eye Irrit. 2, H319; Skin Sens. 1, H317; <br />STOT SE 3, H335 <br />CAS: 9016-87-9</p> <p>diphenylmethanediisocyanate,isomeres and homologues <br />10-25% <br />Resp. Sens. 1, H334; Carc. 2, H351; STOT RE 2, H373; <br />Acute <br />Tox. 4, H332; Skin Irrit. 2, H315; Eye Irrit. 2, H319; Skin Sens. 1, H317; <br />STOT SE 3, H335</p> <p>CAS: 2536-05-2 <br />diphenylmethane-2,2'-diisocyanate <br /><2.5% <br />EINECS: 219-799-4 <br />Resp. Sens. 1, H334; Carc. 2, H351; STOT RE 2, H373; <br />Acute <br />Tox. 4, H332; Skin Irrit. 2, H315; Eye Irrit. 2, H319; Skin Sens. 1, H317; <br />STOT SE 3, H335 <br />SECTION 4: First aid measures <br />· 4.1 Description of first aid measures <br />· General information <br />Personal protection for the First Aider. <br />It is possible to choke in case of vomiting in unconsciousness. <br />Bring unconscious persons into a stable position on side. <br />Keep the respiratory tract free (remove dentures and vomiting). <br />Check the pulse. In case of heart failure you have to make a cardiac massage. In case of stoppage <br />(Contd. on page 3) <br />GB</p> <p>48.0.13</p> <p>Page 3/9</p> <p>Safety data sheet <br />according to 1907/2006/EC, Article 31 <br />Printing date 24.01.2019</p> <p>Version number 15</p> <p>Revision: 24.01.2019</p> <p>Trade name: ASOFLEX-AKB WAND + BODEN (B-Komponente) <br />(Contd. of page 2)</p> <p>of breathing: artificial respiration. <br />Take up a doctor immediately! <br />· After inhalation Supply fresh air or oxygen; call for doctor. <br />· After skin contact <br />Instantly wash with water and soap and rinse thoroughly. <br />Change immediately contaminated clothes. <br />· After eye contact Rinse opened eye for several minutes under running water. Then consult doctor. <br />· After swallowing <br />Do not induce vomiting; instantly call for medical help. <br />Do not give household remedys (milk, alcohol etc.) <br />Show the pack or the label to the doctor. <br />· 4.2 Most important symptoms and effects, both acute and delayed <br />No further relevant information available. <br />· 4.3 Indication of any immediate medical attention and special treatment needed <br />After seriously exposition the patient should be 48 hours under medical supervision. <br />*</p> <p>SECTION 5: Firefighting measures <br />· 5.1 Extinguishing media <br />· Suitable extinguishing agents <br />CO2, extinguishing powder or water jet. Fight larger fires with water jet or alcohol-resistant foam. <br />· For safety reasons unsuitable extinguishing agents Water with a full water jet. <br />· 5.2 Special hazards arising from the substance or mixture <br />Formation of poisonous gases during heating or in fires. <br />· 5.3 Advice for firefighters <br />· Protective equipment: Wear self-contained breathing apparatus. <br />· Additional information <br />Cool endangered containers with water spray jet. <br />Dispose of fire debris and contaminated fire fighting water in accordance with official regulations.</p> <p>*</p> <p>SECTION 6: Accidental release measures <br />· 6.1 Personal precautions, protective equipment and emergency procedures <br />Bring persons out of danger. <br />Wear protective equipment. Keep unprotected persons away. <br />· 6.2 Environmental precautions: Do not allow product to reach sewage system or water bodies. <br />· 6.3 Methods and material for containment and cleaning up: <br />Ensure adequate ventilation. <br />Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). <br />· 6.4 Reference to other sections <br />See Section 7 for information on safe handling <br />See Section 8 for information on personal protection equipment. <br />See Section 13 for information on disposal.</p> <p>*</p> <p>SECTION 7: Handling and storage <br />· 7.1 Precautions for safe handling <br />Do not breath in aerosole, dust and vapour. <br />Ensure good ventilation/exhaustion at the workplace. <br />Keep away from children. <br />· Information about protection against explosions and fires: No special measures required. <br />· 7.2 Conditions for safe storage, including any incompatibilities <br />· Storage <br />· Requirements to be met by storerooms and containers: <br />No special requirements. <br />Protect against wetness and water. <br />(Contd. on page 4) <br />GB</p> <p>48.0.13</p> <p>Page 4/9</p> <p>Safety data sheet <br />according to 1907/2006/EC, Article 31 <br />Printing date 24.01.2019</p> <p>Version number 15</p> <p>Revision: 24.01.2019</p> <p>Trade name: ASOFLEX-AKB WAND + BODEN (B-Komponente) <br />(Contd. of page 3)</p> <p>Protect from frost <br />The Product reacts with water and CO2-Gas will be given off. <br />In tight closed containers pressure may arise and the cover can burst. <br />· Information about storage in one common storage facility: <br />Recommended storage conditions: Indoor, Temperature between 10°C-30°C <br />· Further information about storage conditions: <br />Keep container tightly sealed. <br />Store in a locked cabinet and out of the reach of children. <br />· 7.3 Specific end use(s) No further relevant information available. <br />*</p> <p>SECTION 8: Exposure controls/personal protection <br />· Additional information about design of technical systems: <br />It must be possible to wash the skin in the working area. <br />Eye-wash bottle must be available. <br />· 8.1 Control parameters <br />· Components with critical values that require monitoring at the workplace: <br />101-68-8 diphenylmethane-4,4'-di-isocyanante (25-50%) <br />WEL Short-term value: 0.07 mg/m³ <br />Long-term value: 0.02 mg/m³ <br />Sen; as -NCO <br />5873-54-1 diphenylmethane-2,4'-diisocyanate (25-50%) <br />WEL Short-term value: 0.07 mg/m³ <br />Long-term value: 0.02 mg/m³ <br />Sen; as -NCO <br />9016-87-9 diphenylmethanediisocyanate,isomeres and homologues (10-25%) <br />WEL Short-term value: 0.07 mg/m³ <br />Long-term value: 0.02 mg/m³ <br />Sen; as -NCO <br />2536-05-2 diphenylmethane-2,2'-diisocyanate (<2.5%) <br />WEL Short-term value: 0.07 mg/m³ <br />Long-term value: 0.02 mg/m³ <br />Sen; as -NCO <br />· Ingredients with biological limit values: <br />101-68-8 diphenylmethane-4,4'-di-isocyanante (25-50%) <br />BMGV 1 µmol creatinine/mol <br />Medium: urine <br />Sampling time: At the end of the period od exposure <br />Parameter: isocyanate-derived diamine <br />5873-54-1 diphenylmethane-2,4'-diisocyanate (25-50%) <br />BMGV 1 µmol creatinine/mol <br />Medium: urine <br />Sampling time: At the end of the period od exposure <br />Parameter: isocyanate-derived diamine <br />2536-05-2 diphenylmethane-2,2'-diisocyanate (<2.5%) <br />BMGV 1 µmol creatinine/mol <br />Medium: urine <br />Sampling time: At the end of the period od exposure <br />Parameter: isocyanate-derived diamine <br />· Additional information: The lists that were valid during the compilation were used as basis. <br />(Contd. on page 5) <br />GB</p> <p>48.0.13</p> <p>Page 5/9</p> <p>Safety data sheet <br />according to 1907/2006/EC, Article 31 <br />Printing date 24.01.2019</p> <p>Version number 15</p> <p>Revision: 24.01.2019</p> <p>Trade name: ASOFLEX-AKB WAND + BODEN (B-Komponente) <br />(Contd. of page 4)</p> <p>· 8.2 Exposure controls <br />· Personal protective equipment <br />· General protective and hygienic measures <br />The usual precautionary measures should be adhered to in handling the chemicals. <br />Instantly remove any soiled and impregnated garments. <br />Wash hands during breaks and at the end of the work. <br />Avoid contact with the eyes and skin. <br />Be sure to clean skin thoroughly after work and before breaks. <br />· Breathing equipment: Use breathing protection in case of insufficient ventilation. <br />· Protection of hands: Hand Protection: Nitril-rubber-latex-gloves. <br />· Material of gloves <br />Butyl rubber II R: Thickness ≥ 0,5mm; Break through time ≥ 480 min <br />· Penetration time of glove material <br />The exact break trough time has to be found out by the manufacturer of the protective gloves and <br />has to be observed. <br />· Eye protection: Safety glasses <br />· Body protection: <br />Protective work clothing. <br />Contaminated protection clothes must be cleaned carefully before reuse. <br />SECTION 9: Physical and chemical properties <br />· 9.1 Information on basic physical and chemical properties <br />· General Information <br />· Appearance: <br />Form: <br />Fluid <br />Colour: <br />Dark brown <br />· Smell: <br />earthy, something musty. <br />· Change in condition <br />Melting point/freezing point: <br />Not determined <br />Initial boiling point and boiling range: 190 °C <br />· Flash point:</p> <p>180 °C</p> <p>· Ignition temperature:</p> <p>400 °C</p> <p>· Self-inflammability:</p> <p>Product is not selfigniting.</p> <p>· Explosive properties:</p> <p>Product is not explosive.</p> <p>· Steam pressure:</p> <p>Not determined.</p> <p>· Density at 20 °C</p> <p>1.22 g/cm³</p> <p>· Solubility in / Miscibility with <br />Water:</p> <p>react with water</p> <p>· Viscosity: <br />dynamic at 20 °C: <br />kinematic:</p> <p>22.5 mPas <br />Not determined.</p> <p>· Solvent content: <br />Solids content: <br />· 9.2 Other information</p> <p>0.0 % <br />No further relevant information available.</p> <p>SECTION 10: Stability and reactivity <br />· 10.1 Reactivity No further relevant information available. <br />(Contd. on page 6) <br />GB</p> <p>48.0.13</p> <p>Page 6/9</p> <p>Safety data sheet <br />according to 1907/2006/EC, Article 31 <br />Printing date 24.01.2019</p> <p>Version number 15</p> <p>Revision: 24.01.2019</p> <p>Trade name: ASOFLEX-AKB WAND + BODEN (B-Komponente) <br />(Contd. of page 5)</p> <p>· 10.2 Chemical stability <br />· Thermal decomposition / conditions to be avoided: <br />No decomposition if used according to specifications. <br />· 10.3 Possibility of hazardous reactions No dangerous reactions known <br />· 10.4 Conditions to avoid No further relevant information available. <br />· 10.5 Incompatible materials: No further relevant information available. <br />· 10.6 Hazardous decomposition products: No dangerous decomposition products known <br />*</p> <p>SECTION 11: Toxicological information <br />· 11.1 Information on toxicological effects <br />· Acute toxicity <br />Harmful if inhaled. <br />· LD/LC50 values that are relevant for classification: <br />101-68-8 diphenylmethane-4,4'-di-isocyanante <br />Oral <br />LD50 <br />>5,000 mg/kg (rats) <br />Dermal LD50 <br />>5,000 mg/kg (rabbit) <br />Inhalative LC50/4 h >0.49 mg/l (rats) <br />9016-87-9 diphenylmethanediisocyanate,isomeres and homologues <br />Oral <br />LD50 <br />>5,000 mg/kg (rats) <br />Dermal LD50 <br />>5,000 mg/kg (rabbit) <br />Inhalative LC50/4 h 490 mg/l (rats) <br />· Primary irritant effect: No irritant action known. <br />· Skin corrosion/irritation <br />Moderate irritated. <br />Animal Experiment shows that materials which knows as "sensitive the respiratory tract" (like <br />Diisocyanate) provoke that. <br />This result shows how important to use always protective clothing. <br />Repeat and/or longer contact can lead to a sentisize of the skin. <br />Causes skin irritation. <br />· Serious eye damage/irritation <br />Causes serious eye irritation. <br />· Respiratory or skin sensitisation <br />May cause allergy or asthma symptoms or breathing difficulties if inhaled. <br />May cause an allergic skin reaction. <br />· Subacute to chronic toxicity: <br />This Produkt is irritant and sensitization are possible by inhalation: <br />repeated inhalation of steam-concentrations or aerosol about the mentioned limit could be cause to <br />sensitization of the respiratory tract. <br />Following symptomes could be caused amongst others: <br />Irritation of eyes, suffocoating in the chest and difficulties in breathing. <br />Symptoms may occur hours after exposition. <br />In fact of sensitization, persons could be heavily react on minimum MDI-Concentrations. <br />Median lethal dose (4 hours) respirable aerosol: 490 mg/kg (rat) <br />· Additional toxicological information: Sensitizing <br />· CMR effects (carcinogenity, mutagenicity and toxicity for reproduction) <br />· Germ cell mutagenicity Based on available data, the classification criteria are not met. <br />· Carcinogenicity <br />Suspected of causing cancer. <br />· Reproductive toxicity Based on available data, the classification criteria are not met. <br />· STOT-single exposure <br />May cause respiratory irritation. <br />· STOT-repeated exposure <br />May cause damage to organs through prolonged or repeated exposure. <br />(Contd. on page 7) <br />GB</p> <p>48.0.13</p> <p>Page 7/9</p> <p>Safety data sheet <br />according to 1907/2006/EC, Article 31 <br />Printing date 24.01.2019</p> <p>Version number 15</p> <p>Revision: 24.01.2019</p> <p>Trade name: ASOFLEX-AKB WAND + BODEN (B-Komponente) <br />(Contd. of page 6)</p> <p>· Aspiration hazard Based on available data, the classification criteria are not met. <br />*</p> <p>SECTION 12: Ecological information <br />· 12.1 Toxicity <br />· Aquatic toxicity: <br />9016-87-9 diphenylmethanediisocyanate,isomeres and homologues <br />LC 0 <br />96 mg/l (zebra danio) <br />>1,000 mg/l (acute fishtoxicity zebrafish) <br />EC50 (3h) > 1,000 mg/l (activated sludge bacteria) <br />· 12.2 Persistence and degradability No further relevant information available. <br />· 12.3 Bioaccumulative potential No further relevant information available. <br />· 12.4 Mobility in soil No further relevant information available. <br />· Ecotoxical effects: <br />9016-87-9 diphenylmethanediisocyanate,isomeres and homologues <br />EC 50 24 mg/l (Daphnia magna) <br />>100 mg/l (E. Coli) <br />· Additional ecological information: <br />· General notes: <br />Water hazard class 1 (Self-assessment): slightly hazardous for water. <br />Do not allow undiluted product or large quantities of it to reach ground water, water bodies or <br />sewage system. <br />· 12.5 Results of PBT and vPvB assessment <br />· PBT: Not applicable. <br />· vPvB: Not applicable. <br />· 12.6 Other adverse effects No further relevant information available.</p> <p>*</p> <p>SECTION 13: Disposal considerations <br />· 13.1 Waste treatment methods <br />· Recommendation <br />Must not be disposed of together with household garbage. Do not allow product to reach sewage <br />system. <br />· European waste catalogue <br />08 00 00 WASTES FROM THE MANUFACTURE, FORMULATION, SUPPLY AND USE (MFSU) <br />OF COATINGS (PAINTS, VARNISHES AND VITREOUS ENAMELS), ADHESIVES, <br />SEALANTS AND PRINTING INKS <br />08 04 00 wastes from MFSU of adhesives and sealants (including waterproofing products) <br />08 04 11 adhesive and sealant sludges containing organic solvents or other dangerous substances <br />07 00 00 WASTES FROM ORGANIC CHEMICAL PROCESSES <br />07 02 00 wastes from the MFSU of plastics, synthetic rubber and man-made fibres <br />07 02 99 wastes not otherwise specified <br />· Uncleaned packagings: <br />· Recommendation: Disposal must be made according to official regulations.</p> <p>*</p> <p>SECTION 14: Transport information <br />· 14.1 UN-Number <br />· ADR, ADN, IMDG, IATA</p> <p>Void</p> <p>· 14.2 UN proper shipping name <br />· ADR</p> <p>Void <br />(Contd. on page 8) <br />GB</p> <p>48.0.13</p> <p>Page 8/9</p> <p>Safety data sheet <br />according to 1907/2006/EC, Article 31 <br />Printing date 24.01.2019</p> <p>Version number 15</p> <p>Revision: 24.01.2019</p> <p>Trade name: ASOFLEX-AKB WAND + BODEN (B-Komponente) <br />(Contd. of page 7)</p> <p>· ADN, IMDG, IATA</p> <p>Void</p> <p>· 14.3 Transport hazard class(es) <br />· ADR, ADN, IMDG, IATA <br />· Class</p> <p>Void</p> <p>· 14.4 Packing group <br />· ADR, IMDG, IATA</p> <p>Void</p> <p>· 14.5 Environmental hazards:</p> <p>Not applicable.</p> <p>· 14.6 Special precautions for user</p> <p>Not applicable.</p> <p>· 14.7 Transport in bulk according to Annex II <br />of Marpol and the IBC Code <br />Not applicable.</p> <p>*</p> <p>· Transport/Additional information:</p> <p>Not dangerous according to the above <br />specifications.</p> <p>· UN "Model Regulation":</p> <p>Void</p> <p>SECTION 15: Regulatory information <br />· 15.1 Safety, health and environmental regulations/legislation specific for the substance or <br />mixture <br />· REGULATION (EC) No 1907/2006 ANNEX XVII Conditions of restriction: 3, 56a, 56b, 56c <br />· National regulations <br />· Water hazard class: Water hazard class 1 (Self-assessment): slightly hazardous for water. <br />· 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out.</p> <p>*</p> <p>SECTION 16: Other information <br />These data are based on our present knowledge. However, they shall not constitute a guarantee for <br />any specific product features and shall not establish a legally valid contractual relationship. <br />· Relevant phrases <br />H315 Causes skin irritation. <br />H317 May cause an allergic skin reaction. <br />H319 Causes serious eye irritation. <br />H332 Harmful if inhaled. <br />H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. <br />H335 May cause respiratory irritation. <br />H351 Suspected of causing cancer. <br />H373 May cause damage to organs through prolonged or repeated exposure. <br />· Department issuing data specification sheet: Environment protection department. <br />· Contact: Mr. Guido Herfort <br />· Abbreviations and acronyms: <br />ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the <br />International Carriage of Dangerous Goods by Road) <br />IMDG: International Maritime Code for Dangerous Goods <br />IATA: International Air Transport Association <br />GHS: Globally Harmonised System of Classification and Labelling of Chemicals <br />EINECS: European Inventory of Existing Commercial Chemical Substances <br />ELINCS: European List of Notified Chemical Substances <br />CAS: Chemical Abstracts Service (division of the American Chemical Society) <br />LC50: Lethal concentration, 50 percent <br />LD50: Lethal dose, 50 percent <br />PBT: Persistent, Bioaccumulative and Toxic <br />vPvB: very Persistent and very Bioaccumulative <br />Acute Tox. 4: Acute toxicity – Category 4 <br />Skin Irrit. 2: Skin corrosion/irritation – Category 2 <br />Eye Irrit. 2: Serious eye damage/eye irritation – Category 2 <br />(Contd. on page 9) <br />GB</p> <p>48.0.13</p> <p>Page 9/9</p> <p>Safety data sheet <br />according to 1907/2006/EC, Article 31 <br />Printing date 24.01.2019</p> <p>Version number 15</p> <p>Revision: 24.01.2019</p> <p>Trade name: ASOFLEX-AKB WAND + BODEN (B-Komponente) <br />(Contd. of page 8) <br />Resp. Sens. 1: Respiratory sensitisation – Category 1 <br />Skin Sens. 1: Skin sensitisation – Category 1 <br />Carc. 2: Carcinogenicity – Category 2 <br />STOT SE 3: Specific target organ toxicity (single exposure) – Category 3 <br />STOT RE 2: Specific target organ toxicity (repeated exposure) – Category 2</p> <p>· * Data compared to the previous version altered. <br />GB</p>
