Folder_SCHOMBURG_MONOFLEX-XL_EN_3022_Web.pdf
6 Pages
518 KB
Download
<h1>Folder_SCHOMBURG_MONOFLEX-XL_EN_3022_Web.pdf</h1> <p>S1 flexible tile adhesive</p> <p>MONOFLEX-XL <br />Tile adhesive with very good working characteristics <br />for special tile laying applications. <br />Problems Solved.</p> <p>S1 flexible tile adhesive <br />MONOFLEX-XL</p> <p>RCHBIE <br />DU</p> <p>–</p> <p>EN</p> <p>–</p> <p>NG <br />GU</p> <p>HOHE</p> <p>High polymer modification, special additives and <br />innovative binder technology enable ceramic tiles and <br />boards, porcelain stoneware and large formats for wall <br />and floor areas to be laid securely. The very long working <br />and setting times combined with very high resistance <br />to vertical slipping enable cost-effective use, even for large <br />format tiles in the wall area and high surface coverage.</p> <p>12 0 0 4</p> <p>Technical data <br />Basis</p> <p>Sand, cement, <br />additive (polymer-modified)</p> <p>Application / <br />+5°C – +25°C <br />substrate temperature <br />Pot life*</p> <p>approx. 2 hours</p> <p>Foot traffic after*</p> <p>after approx. 12 hours</p> <p>Groutable*</p> <p>after approx. 12 hours</p> <p>Packaging</p> <p>20 kg foil bag</p> <p>* at +23 °C and 50 % rel. humidity</p> <p>Material consumption rate <br />approx. 1.6 kg/m2 with 6 mm notched trowel <br />Consumption <br />approx. 2.1 kg/m2 with 8 mm notched trowel <br />approx. 2.6 kg/m2 with 10 mm notched trowel</p> <p>Application areas <br />· MONOFLEX-XL is a flexible mortar for laying large <br />format porcelain stoneware tiles, earthenware and <br />other ceramic coverings, mosaics and non-translucent <br />natural stones that are sensitive to discolouration <br />in a thin bed. <br />· MONOFLEX-XL is suitable for application on all <br />substrates in accordance with DIN 18157, part 1, <br />e.g. concrete, aerated concrete, plaster, cement and <br />heated or non-heated calcium-sulphate (flow) screed, <br />masonry work, gypsum fibre boards, composite <br />elements from expanded or extruded polystyrene <br />with mortar coating and fabric lining, etc. <br />· For application on mineral and dispersion-based <br />SCHOMBURG compound seals. <br />Properties <br />· Highly yielding. <br />· For large formats. <br />· Highly non slump with good working characteristics. <br />· Very low emission. <br />· For underfloor heating. <br />· For indoors and outdoors. <br />· Walls and floors. <br />· Normal-setting. <br />· Meets the requirement criteria of the “Flexible mortar” <br />data sheet. <br />· Tested in accordance with DIN EN 12004, C2 TE S1.</p> <p>schomburg.com</p> <p>The dependable solution <br />for special challenges. Highly <br />yielding S1 tile adhesive <br />for reliable tile laying. <br />MONOFLEX-XL is a modern, effective, new generation <br />S1 flexible adhesive mortar and is a reliable guarantee <br />for bonding ceramic tiles and large formats, particularly <br />for demanding applications. Its convenient working <br />characteristics, high slump resistance, very long setting <br />time and its yield of up to 35% more enable <br />extraordinarily good application for wall and floor areas.</p> <p>High yielding <br />Up to 35% lower <br />consumption</p> <p>STAND <br />CH</p> <p>ST <br />FE</p> <p>HO</p> <p>High degree of polymer <br />modification <br />Very flexible</p> <p>u</p> <p>rle</p> <p>er</p> <p>gun</p> <p>g–</p> <p>– f ür di <br />tsc</p> <p>hfes</p> <p>t e Fli e s e</p> <p>nv</p> <p>e</p> <p>Very resistant to slumping <br />For slippage-resistant tiling</p> <p>30/22 TS/KK/Tet/LiW/SaB</p> <p>SCHOMBURG GmbH <br />Aquafinstrasse 2–8 <br />D-32760 Detmold (Germany) <br />Telephone +49-5231-953-00 <br />Fax <br />+49-5231-953-333 <br />www.schomburg.com</p> <p>Subject to change without prior notification. The valid issue of the corresponding technical data sheet legally applies.</p>
