MONOFLEX-XL_204302_Englisch.pdf
4 Pages
1.41 MB
Download
<h1>MONOFLEX-XL_204302_Englisch.pdf</h1> <p>Technical Datasheet <br />MONOFLEX-XL <br />S1 flexible, high yielding tile adhesive</p> <p>Material number</p> <p>Contents</p> <p>Unit of quantity</p> <p>Colour</p> <p>204302002</p> <p>20</p> <p>KG</p> <p>Cement grey</p> <p>Product features <br />Cementitious tile adhesive <br />C2 TE S1 in accordance with DIN EN 12004 <br />Contains lightweight filler <br />Long working time of approx. 2 hours <br />Long open time of ca. 30 minutes <br />Can be walked on and joined after ca. 12 hours <br />Adhesive bed thicknesses von 1 mm bis 10 mm</p> <p>Advantages <br />Tested system product <br />Reliable drying even with large formats <br />Convenient compaction properties <br />Increased area coverage thanks to lightweight fillers</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />1/4</p> <p>01/08/2023</p> <p>Technical Datasheet <br />MONOFLEX-XL <br />Areas of application <br />For laying ceramic tiles and boards using thin-bed laying <br />Especially for laying large formats <br />for heated and unheated substrates <br />For walls and floors</p> <p>Existing test certificates <br />Test report in accordance with DIN EN 12004 <br />EMICODE licence <br />AgBB certificate</p> <p>Technical Data <br />Material properties <br />Base material</p> <p>Vapour diffusion behaviour <br />Classification of the reaction to fire in accordance with DIN EN 13501-1</p> <p>sand <br />cement <br />Additive <br />Vapour permeable <br />E</p> <p>Mixing <br />Increased flexibility (deflection of ≥ 5 mm) <br />Addition of ELECTRON-PLUS to produce conductivity <br />Addition of water when adding ELECTRON-PLUS to produce conductivity <br />Mixing time <br />Maturing time <br />Water addition</p> <p>UNIFLEX-F quantity addition: 4 kg on 20 kg container <br />approx. 2.9 l <br />approx. 7.8 l <br />approx. 3 - 5 minutes <br />approx. 4 minutes <br />From 7.6 l to 8.8 l per 20 kg</p> <p>Application <br />Substrate temperature <br />Pot life <br />Consumption pro m² and mm layer thickness <br />Foot traffic after <br />Consumption with 6mm notched trowel <br />Consumption with 8mm notched trowel <br />Consumption with 10mm notched trowel <br />Application temperature <br />Available after <br />Hardening time / full resilience <br />Open time</p> <p>from 5 °C to 25 °C <br />approx. 120 minutes <br />approx. 0.74 kg <br />approx. 12 hours <br />1.6 kg/m² <br />2.1 kg/m² <br />2.6 kg/m² <br />from 5 °C to 25 °C <br />approx. 12 hours <br />approx. 7 days <br />approx. 30 minutes</p> <p>Application technology <br />Aids/tools <br />Serrated or layer-thickness trowel <br />Stirrer <br />Trowel <br />Occupational safety equipment</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />2/4</p> <p>01/08/2023</p> <p>Technical Datasheet <br />MONOFLEX-XL <br />Suitable substrate <br />Firmly adhering tiled finishes <br />Concrete, cement screed (CT), floor levelling compounds, calcium sulphate screeds (CA, CAF), mastic asphalt screeds (AS), magnesia <br />screeds (MA) <br />Cement-based plaster, gypsum plaster, cement-lime plaster, lightweight plaster <br />Tile bearing elements, gypsum fibre boards, gypsum boards, raised floors, cement and fibre cement boards, decoupling mats & panels, dry <br />screeds <br />Bonded waterproofing; the suitability of the substrate must be checked and observed, taking into account the planned water impact class of <br />DIN 18534 and DIN 18531.</p> <p>Substrate preparation <br />Requirement for substrate <br />1. <br />2. <br />3. <br />4. <br />5. <br />6.</p> <p>Load-bearing <br />Dry <br />Even <br />Sealed in the surface <br />Free of cracks <br />Free of adhesion inhibiting substances and laitance layers</p> <p>Preparing the surface <br />1. <br />2. <br />3. <br />4.</p> <p>Check the application substrate and determine the moisture content using the CM method. <br />Remove impurities, adhesion-reducing substances and binder accumulations/laitance layers. <br />Prime absorbent substrates with ASO-Unigrund-GE or ASO-Unigrund-K. <br />Prime non-absorbent substrates with ASO-Unigrund-S.</p> <p>Usage <br />Mixing <br />1. Put the water into a clean mixing bucket and mix with the powder component with a stirrer to produce a homogeneous, lump-free mass. <br />2. After a settling period of ca. 4 minutes, thoroughly homogenise the compound again. <br />3. Do not mix more material than can be applied during the pot life.</p> <p>Application <br />1. Spread the mixed mortar evenly across the substrate surface and comb through with a suitable notched trowel to suit the board size. <br />2. Apply the surfacing materials within the adhesive open time.</p> <p>Cleaning tools <br />Clean tools thoroughly with water after use.</p> <p>Storage conditions <br />Storage <br />Store in a cool and dry place. Min. 12 months in the original canister. Promptly use opened canister.</p> <p>Disposal <br />Product leftovers can be disposed of in accordance with disposal code AVV 17 01 01.</p> <p>Emission behaviour / building certification systems <br />Very low emissions in accordance with GEV-EMICODE, which normally results in positive evaluations within the scope of building <br />certification systems in accordance with DGNB, LEED, BREEAM, HQE. <br />Maximum quality level 4, line 8 in accordance with DGNB criteria "ENV 1.2 Risks to the local environment".</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />3/4</p> <p>01/08/2023</p> <p>Technical Datasheet <br />MONOFLEX-XL <br />Notes <br />When laying natural stone and synthetic stone, the product-specific properties of the coating materials (tendency to discolour, risk of curling, <br />etc.) and the laying recommendations of the manufacturer must be taken into account. We recommend carrying out trial laying! <br />Rooms, surfaces and building components that expect water exposure in accordance with DIN 18534, DIN 18531 and DIN 18535 must <br />be protected by bonded waterproofing. <br />Calcium sulphate screeds must be protected with the ASO®-Unigrund-GE or ASO®-Unigrund-K primer prior to laying. Calcium sulphate <br />screeds must be protected with a barrier primer (e.g. ASODUR®-GBM) when laying large format tiles. <br />Do not stir or add water to existing material that has already set in order to make it workable again. <br />Use a barrier primer such as ASODUR®-GBM to protect substrates that are sensitive to moisture, such as magnesite screeds, from direct <br />contact. <br />Protect the product from water, frost, draughts, direct sunlight and mechanical loads until it has dried completely.</p> <p>Planning, inspection of substrates and building site circumstances, laying, grouting and subsequent <br />care of the work must be done in accordance with the relevant DIN standards and recognised rules of <br />technology (e.g. the ZDB sheets of the Zentralverband Deutsches Baugewerbe e.V.) in the latest <br />version. <br />GISCODE: ZP1 <br />Annotations <br />Conformity / Declaration / Verification</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you <br />in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description <br />does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />4/4</p> <p>01/08/2023</p>
