Declaration of Performance according to Annex III of the Regulation (EU) No. 305/2011 amended by Commissions delegated Regulation (EU) No 574/2014
for the product
THERMOPAL-SP 201419-3
1.
Unique identification code of the product type:
201419
2. Intended use:
General purpose rendering/ plastering mortar (GP)
3. Manufacturer:
Schomburg GmbH & Co. KG Aquafinstrasse 2-8 32760 Detmold
4. System or systems of assessment and verification of constancy of performance of the construction product as:
System 4
5. Harmonized standard:
EN 998-1:2016
6. Notified test laboratory:
not relevant
7. Declared performance:
Performance Essential characteristic Compressive strength Adhesive tensile strength, 28d Image after break Capillary water uptake Coefficient of water-vapor permeability Thermal conductivity (average value λ10, dry mat.), average value from table (P 50%), EN 1745 Fire reaction Durability (frost resistance) Dangerous substances
System of assessment and verification of constancy of performance
Harmonised technical specification
CS IV ≥ 0,08 N/mm2 A Wc0 ≤ 25 EN 998-1:2016 < 0,83 A1 resistant in case of handling according to the technical data sheet NPD
The performance of the product identified in points 1 and 2 is in conformity with the declared performance in point 8. This declaration of performance is issued under the sole responsibility of the manufacturer identified in point 4.
Signed for and on behalf of the manufacturer by: Stefan Flügge, technical Service (name and function)
Detmold, 16.02.2022
This declaration of performance was created electronically. It is valid without manual signature.
The current material safety data sheet and technical data sheet is downloadable under
http://www.schomburg.de/de/Sicherheitsdatenblatt-datenblaetter.html or http://www.schomburg.de/de/Technisches_Merkblatt-datenblaetter.html