SCHOMBURG GmbH & Co. KG Aquafinstrasse 2–8 D-32760 Detmold (Germany) phone + 49-5231- 953-00 fax + 49-5231- 953-108 email export@schomburg.de www.schomburg.com
Technical Data Sheet
AG70
Art.-No. 2 05731
Primer for ESCOSIL silicone
Substrate preparation: The bonding surface must be clean, dry and free from release agents. Remove old adhesive and adhesion inhibiting substances. The joint edges must be clean and free from dust. Clean by brushing out and vacuuming as necessary.
• One component • Based on silicone resin • System component of ESCOSIL-2000, ESCOSIL-2000-UW, ESCOSIL-2000-ST Areas of application: To improve the bond of the system-based silicone sealants to metals such as stainless steel, aluminium, copper, galvanized steel, chromium, brass and to certain plastics such as acrylic and PVC. Also to improve the bond of ESCOSIL-2000-ST to natural stone especially when installing in wet duty environments. Where substrates are not named, carry out suitability tests before use.
Product application: Apply AG70 thinly and evenly with a clean lint free cloth or paper towel. Do not use a brush. Avoid excess as there is a risk of film formation. When using with natural stone apply carefully to the joints or joint edges and do not spatter. Risk of spotting / staining. Keep to a drying or airing time of min. 15 minutes and max 3 hours (avoid dust accumulation).
Technical Data: Density/specific gravity: approx. 0.76 g/cm3 Colour: colourless / lightly yellow Solvent: aliphatic hydrocarbons Drying time *): min. 15-20 mins / max. 3 hrs Ignition temperature: > +420° C Flash point: +9° C Consumption: approx. 80 g/m2 Storage: 12 months when stored in the original unopened packaging. Use opened packaging promptly. Packaging: 250 ml
Advice: Protect areas not being treated with AG70 from its effects. Please observe a valid EU Safety Data Sheet. GISCODE: S6
* Values relate to +23 °C and 50% relative humidity
The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued. 1/1
WKD/CoS/TM
29/18