ASO-Anschlussdichtecke-I_206136_Englisch.pdf
3 Halaman
231 KB
Download
<h1>ASO-Anschlussdichtecke-I_206136_Englisch.pdf</h1> <p>Technical data sheet <br />ASO®-Anschlussdichtecke-I <br />Internal connector corner for bonded waterproofing in combination with tiled finishes</p> <p>Material number</p> <p>Angle / installation position</p> <p>Packaging</p> <p>Colour</p> <p>206136001</p> <p>90° internal</p> <p>piece</p> <p>Grey with SCHOMBURG logo</p> <p>Areas of use/bonded waterproofing <br />for reliable integration of bath or shower trays into the bonded waterproofing system <br />for reliable integration of floor-to-ceiling window or door elements into the bonded waterproofing system <br />for reliable integration of metallic profiles into the bonded waterproofing <br />as a system component for bonded waterproofing for water impact class W0-I to W2-I in accordance with DIN 18534</p> <p>Product features <br />Fleece-laminated internal corner in a Connector-Joint-Tape system <br />Flexible and stretchy <br />Pre-formed 90° corner <br />High bonding - thanks to one-sided butyl strip</p> <p>Advantages <br />Tested system product <br />Canted internal corner <br />High adhesion to smooth surfaces <br />Flexible connection to elements</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />1/3</p> <p>18/06/2025</p> <p>Technical data sheet <br />ASO®-Anschlussdichtecke-I <br />Technical Data <br />Material properties</p> <p>Burst pressure <br />Reaction to fire in accordance with DIN EN 4102 <br />Sealing against pressing water until <br />Sd-value in accordance with DIN EN 1931</p> <p>Piece goods <br />TPE <br />Composite material: Fleece-membrane-fleece <br />≥ 1.5 bar <br />B2 <br />1.5 bar <br />> 14 m ± 7 m</p> <p>Temperature resistance <br />Vapour diffusion behaviour</p> <p>- 30 + 90 °C <br />Vapour diffusion-inhibiting</p> <p>Product components <br />Base material</p> <p>Application <br />Consumption</p> <p>approx. 1 m per m</p> <p>Processing equipment <br />Aids/tools <br />Serrated or layer-thickness trowel <br />Flat trowel <br />Brush <br />Pressure roller <br />Scissors/knife</p> <p>Suitable substrate <br />Dry screeds <br />Raised floors <br />Tile bearing elements <br />Firmly adhering tiled finishes <br />Concrete, cement screed (CT), floor levelling compounds, calcium sulphate screeds (CA, CAF), mastic asphalt screeds (AS), magnesia <br />screeds (MA) <br />Cement-based plaster, gypsum plaster, cement-lime plaster, lightweight plaster <br />Bonded waterproofing; the suitability of the substrate must be checked and observed, taking into account the planned water impact class of <br />DIN 18534 and DIN 18531.</p> <p>Preparing the substrate <br />Requirement for substrate <br />1. Dry <br />2. Load-bearing <br />3. Even <br />4. Sealed in the surface <br />5. Free of cracks <br />6. Free from negative pressing water <br />7. Free of adhesion inhibiting substances</p> <p>Application <br />Application <br />1. Clean and degrease the connection element. <br />2. Remove the protective strip from the self-adhesive strip and bond the ASO® joint tape onto the connection element. <br />3. Press down the self-adhesive strip firmly with a pressure roller. <br />4. Press in the joint sealing tape in the waterproofing layer meticulously without voids or wrinkles, using a flat trowel or pressure roller. <br />5. Joint-tape edges or connections to pre-formed pieces are applied with an overlap of at least 5 cm. <br />6. Bond joint-tape edges or connections with the waterproofing material without wrinkles, covering the whole area, and overcoat after. <br />7. If a liquid waterproofing membrane is used, apply the second layer of waterproofing membrane on top of the connecting waterproofing tape.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />2/3</p> <p>18/06/2025</p> <p>Technical data sheet <br />ASO®-Anschlussdichtecke-I <br />Storage conditions <br />Storage <br />Cool, dry, protected from sunlight. Min. 12 months in the original canister.</p> <p>Notes <br />Remove adhesive strips from any existing interfaces of the joint tape roll. Establish the connection area overlapping. <br />Joints that are secured with ASO®-Anschlussdichtecke-I must be adequately protected against mechanical damage! <br />ASO®-Anschlussdichtecke-I may not be glued or overcoated afterwards with products containing solvents.</p> <p>Relevant regulations <br />Planning, inspection of substrates and building site circumstances, laying, grouting and subsequent <br />care of the work must be done in accordance with the relevant DIN standards and recognised rules of <br />technology (e.g. the ZDB Data sheets of the Zentralverband Deutsches Baugewerbe e.V.(German <br />construction Association) in the latest version.</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you <br />in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description <br />does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />3/3</p> <p>18/06/2025</p>
