SCHOMBURG GmbH & Co. KG Aquafinstrasse 2 – 8 D-32760 Detmold (Germany) phone + 49 -5231- 953-00 fax + 49 -5231- 953-108 email export@schomburg.de www.schomburg.com
Technical Data Sheet
ASO®-Unigrund-GE
Art.-No. 2 05536
Ready to use primer
Packaging: 1, 5, 10, 25 and 210 litre containers Consumption: approx. 200 g/m²
v er
y lo
io n
• Rapid drying • Universal application • Resistant to water and alkalis • Solvent free
w e m is
s
Areas of application: ASO-Unigrund-GE reduces the absorption of substrates, binds surface dust, consolidates, prevents rapid water loss from levelling compounds. ASO-Unigrund-GE is used for priming absorbent and lightly sanded substrates e.g. gypsum-based construction materials (plaster, interlocking gypsum slabs, boards, screeds), concrete, masonry work and similar. Suitable as an adhesion promoter for surface applied waterproof membranes (e.g. SANIFLEX, AQUAFIN-2K/M), thin-bed adhesives such as LIGHTFLEX, MONOFLEX-XL, SOLOFLEX, AK7P, UNIFIX as well as wall and floor levelling compounds such as SOLOCRET-15, SOLOPLAN-30-PLUS and ASO-NM15. It is also suitable for exterior use. ASO-Unigrund-GE is suitable for use in interior rooms in accordance with the French VOC by-law and the Belgian royal decree C-2014/24239. Very low emissions in accordance with GEV-EMICODE, which as a rule leads to positive evaluations within the framework of building certification systems in accordance with DGNB, LEED, BREEAM, HQE. Highest quality level 4, rows 2,3,8,9 in accordance with the DGNB criterion “ENV 1.2 local environmental impact“. Technical Data: Basis: acrylate dispersion Colour: coloured green Application/substrate temperature: +5° C to +30° C Specific gravity: 1.0 g/cm3 Cleaning: whilst still fresh, with water Storage: frost free, 15 months in the original unopened packaging. Use opened packaging promptly.
Substrate preparation: The substrate must be load-bearing, clean, dry and free from materials, which will impede adhesion. Flow screeds must be abraded and vacuumed. Remove unstable or weakly bonded layers e.g. release agents, residues of old adhesive, levelling layers, surface finishes and paints, by mechanical scrubbing, planing, scabbling or shot-blasting. Product preparation: ASO-Unigrund-GE is ready to use. Application is with a paint brush, brush or a fine-pored sponge roller but it can also be sprayed with suitable equipment. Avoid applying too thickly or forming puddles. ASO-Unigrund-GE must be fully dry before further work can be carried out on the primed surface. Advice: • The primer must be dry before applying the next coat. • Protect areas not being treated with ASO-Unigrund-GE. • Do not apply wet in wet. • Wash off splashes immediately. Please observe a current valid EU Safety Data Sheet. GISCODE: M-GP01
Information about the emission level of volatile compounds in indoor air, which pose a health risk by inhalation, on a scale from class A+ (very low emissions) to C (high emissions).
This technical data sheet is a translation from the German language version and does not consider local building codes or legal requirements. It shall be used as general reference for the product. Legally binding is only the German technical data sheet or the latest Data sheet from one of our foreign subsidiaries inside their sales territory.
1/1
WKD/CoS/TM
22/17