SCHOMBURG GmbH & Co. KG Aquafinstrasse 2 – 8 D-32760 Detmold (Germany) phone + 49 -5231- 953-00 fax + 49 -5231- 953-108 email export@schomburg.de www.schomburg.com
Technical Data Sheet
ASOL-SM
Art.-No. 2 03009
Bituminous smoothing compound, fibre-reinforced
• ready to use • contains solvent • asbestos free • watertight and water impermeable • resistant to UV rays, weathering and naturally occurring aggressive materials in the ground • extensively flexible once cured • for exterior use Areas of application: ASOL-SM is suitable for smoothing and repair work in roof areas, on to fibre cement, roofing felt, hot-welded bitumen sheets, lead and zinc. Technical Data: Basis: bitumen Solids content: approx. 73 % Viscosity: 1000–1500 dPas at +20 °C Consumption: approx. 1.3 kg/m2 per 1 mm thickness Application/substrate temperature: +5 °C to +30 °C Packaging: 5 kg container Storage: 12 months when stored cool and dry in the original unopened packaging. Use opened packaging promptly. Cleaning: Clean tools immediately after use with ASO-R001
Substrate preparation: The substrate must be dry, free from frost, oil and grease, be load bearing as well as free from adhesion inhibiting materials. Product preparation: ASOL-SM is supplied ready for use and can be used directly from the packaging. Application is by trowel or steel float. When fully coated, the thickness should not exceed 3 mm (bubble formation is possible in warmer weather and under direct sunlight). Important advice: • Protect areas not being treated with ASOL-SM. • When storing and using, follow safety measures for handling inflammable solvents. • ASOL-SM is inflammable, therefore keep the container tightly closed. • Keep away from sources of ignition – do not smoke. Please observe a valid EU safety data sheet! GISCODE: BBP20
This technical data sheet is a translation from German and does not consider local building codes or legal requirements. It shall be used as general reference for the product. Legally binding is only the latest German technical data sheet or the latest data sheet from one of our foreign subsidiaries inside their sales territory.
1/1
SF/CoS/TM
22/17