FIX-10-M _GB_TM_1215.pdf
1 Halaman
41,5 KB
Download
<h1>FIX-10-M _GB_TM_1215.pdf</h1> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2–8 <br />D-32760 Detmold (Germany) <br />phone + 49-5231- 953-00 <br />fax <br />+ 49-5231- 953-108 <br />email export@schomburg.de <br />www.schomburg.com</p> <p>Technical Data Sheet</p> <p>FIX 10-M </p> <p> </p> <p>Anchoring cement</p> <p>Properties: <br />• Chloride free <br />• Rapid setting <br />• Multiple uses <br />• High early and final strengths <br />• Compatible with all standardised cements <br />Areas of application: <br />FIX 10-M is especially suitable for the rapid sealing of <br />holes and for the rapid fixing of radiators, railings and <br />all types of dowling rods. <br />FIX 10-M can also be used as a binder for rapid repair <br />work in concrete, synthetic and natural stone, render, <br />screed or masonry work. <br />Non iron containing metals such as e.g. aluminium, <br />zinc, lead or copper should not come into contact with <br />FIX10-M or a mortar produced from it. These should <br />be completely sealed with a corrosion inhibitor e.g. <br />ASODUR-GBM. <br />Technical Data: <br />Basis: cement, additives <br />Colour: cement grey <br />Bulk density: <br />approx. 1.10 kg/dm3 <br />Application/substrate <br />temperature: <br />+5° C to +35° C <br />Pot life: <br />3 – 8 mins (dependent on <br /> temperature and mix) <br />Water demand: <br />trowelable consistency <br /> 25 – 30% <br /> flowable consistency <br /> 30 – 40% <br />Storage: <br />12 months when stored in <br /> <br />the original unopened <br /> <br />packaging. Use opened <br /> packaging promptly. <br />Packaging: <br />1, 6 and 12 kg <br /> plastic buckets</p> <p>Art.-No. 2 01818</p> <p>Strengths: <br />Storage climate +23° C/50% relative humidity <br />Application area Measurement</p> <p>1 hour</p> <p>1 day</p> <p>28 days</p> <p>Trowelable <br />consistency</p> <p>Compressive <br />strength N/mm2</p> <p>approx. <br />5.0</p> <p>37.5</p> <p>46.3</p> <p>Flowable <br />consistency</p> <p>Compressive <br />strength N/mm2</p> <p>approx. <br />4.0</p> <p>approx. <br />35.0</p> <p>approx. <br />45.0</p> <p>Substrate preparation: <br />Remove loose render and masonry. Always pre-wet the <br />substrate, but avoid puddle formation. <br />Product preparation: <br />Take the recommended water quantity and add FIX <br />10-M to this gauging water, as mixing the other way <br />around may lead to lump formation. FIX-10-M must be <br />mixed and used quickly as setting begins after only <br />3 – 8 minutes. <br />Do not mix more material than can be used within <br />this time. Mortar which has started to set must not be <br />remixed. With deep repairs FIX 10-M can be mixed <br />with common constructional aggregate. <br />Mixing ratio: 1 part FIX 10-M : 1 -2 parts aggregate. <br />Advice: <br />• Protect areas not being treated with FIX 10-M. <br />• Carry out appropriate site trials. <br />• Where there is running / seeping water use FIX 10-S. <br />• The high binding strength of FIX 10-M also permits the <br />addition of “sharp” sand without retarding the setting <br />process. The strength is reduced with increasing <br />quantities of sand. FIX 10-M must not be mixed with <br />gypsum or come into contact with it. <br />Please observe a current valid Health & Safety <br />Data Sheet. <br />GISCODE: ZP1</p> <p>This technical data sheet is a translation from the German language version and does not consider local building codes or legal requirements. It shall be used as general <br />reference for the product. Legally binding is only the German technical data sheet or the latest Data sheet from one of our foreign subsidiaries inside their sales territory.</p> <p>1/1</p> <p>HZ/CoS/JD 12/15</p>
