MONOFLEX_204400_Englisch.pdf
4 Halaman
1,43 MB
Download
<h1>MONOFLEX_204400_Englisch.pdf</h1> <p>Technical data sheet <br />MONOFLEX <br />S1 flexible tile adhesive</p> <p>Material number</p> <p>Contents</p> <p>Unit of quantity</p> <p>Packaging</p> <p>Colour</p> <p>204400002</p> <p>5</p> <p>KG</p> <p>Sachets</p> <p>Cement grey</p> <p>204400003</p> <p>20</p> <p>KG</p> <p>Bag</p> <p>Cement grey</p> <p>Areas of application <br />For laying ceramic tiles and boards using thin-bed laying <br />for heated and unheated substrates <br />For walls and floors <br />for interior and exterior use</p> <p>Product features <br />Cementitious tile adhesive <br />C2 TE S1 after DIN EN 12004 <br />Can be walked on and joined after ca. 12 hours <br />Long working time of approx. 2 hours <br />Adhesive bed thicknesses ca. 1 - 10 mm</p> <p>Advantages <br />Tested system product <br />Convenient compaction properties</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />1/4</p> <p>12/06/2025</p> <p>Technical data sheet <br />MONOFLEX <br />Existing test certificates <br />Test report in accordance with DIN EN 12004 <br />EMICODE licence <br />AgBB certificate</p> <p>Technical Data <br />Material properties <br />Product components <br />Base material</p> <p>Classification of the reaction to fire in accordance with DIN EN 13501-1</p> <p>1 component system <br />sand <br />cement <br />Additive <br />E</p> <p>Mixing <br />Increased flexibility (deflection of ≥ 5 mm) <br />Maturing time <br />Water addition</p> <p>UNIFLEX-F quantity addition: 4 kg on 20 kg container + 3.2 l <br />water <br />approx. 3 minutes <br />approx. 7,4 l - 7,6 l</p> <p>Application <br />Consumption pro m² and mm layer thickness <br />Foot traffic after <br />Consumption with 6mm notched trowel <br />Consumption with 8mm notched trowel <br />Consumption with 10mm notched trowel <br />Application temperature <br />Hardening time / full resilience <br />Open time</p> <p>approx. 0.8 kg/m² <br />approx. 12 hours <br />1.8 kg/m² <br />2.3 kg/m² <br />2.8 kg/m² <br />approx. 5 - 25 °C <br />approx. 7 days <br />approx. 30 minutes</p> <p>Processing equipment <br />Aids/tools <br />Serrated or layer-thickness trowel <br />Stirrer <br />Trowel <br />Plastering trowel <br />Occupational safety equipment</p> <p>Suitable substrate <br />Firmly adhering tiled finishes <br />Concrete, cement screed (CT), floor levelling compounds, calcium sulphate screeds (CA, CAF), mastic asphalt screeds (AS), magnesia <br />screeds (MA) <br />Cement-based plaster, gypsum plaster, cement-lime plaster, lightweight plaster <br />Tile bearing elements, gypsum fibre boards, gypsum boards, raised floors, cement and fibre cement boards, decoupling mats & panels, dry <br />screeds <br />Bonded waterproofing; the suitability of the substrate must be checked and observed, taking into account the planned water impact class of <br />DIN 18534 and DIN 18531.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />2/4</p> <p>12/06/2025</p> <p>Technical data sheet <br />MONOFLEX <br />Preparing the substrate <br />Requirement for substrate <br />1. Load-bearing <br />2. Dry <br />3. Even <br />4. Sealed in the surface <br />5. Free of cracks <br />6. Free of adhesion inhibiting substances and laitance layers</p> <p>Measures for substrate preparation <br />The requirements in DIN 18157 - 1 and the recognised technical standards are essential for preparing the application substrates.</p> <p>Preparing the surface <br />1. Check the application substrate and determine the moisture content using the CM method. <br />2. Remove impurities, adhesion-reducing substances and binder accumulations/laitance layers. <br />3. Prime absorbent substrates with ASO-Unigrund-GE, ASO-Unigrund-K or ASO-Unigrund-PLUS. <br />4. Prime non-absorbent substrates with ASO-Unigrund-S or ASO-Unigrund-PLUS.</p> <p>Moisture content of the CM measurement</p> <p>Application <br />Mixing <br />1. Fill the water into a clean mixing bucket and mix with the powder component with a stirrer to produce a homogeneous, lump-free mass. <br />2. After a settling period of ca. 3 minutes, thoroughly homogenise the compound again. <br />3. Do not mix more material than can be applied during the pot life.</p> <p>Application <br />1. Spread the mixed mortar evenly across the substrate surface and comb through with a suitable notched trowel to suit the board size. <br />2. Apply the surfacing materials within the adhesive open time.</p> <p>Cleaning tools <br />Clean tools thoroughly with water after use.</p> <p>Storage conditions <br />Storage <br />Store in a cool and dry place. Min. 12 months in the original canister. Promptly use opened container.</p> <p>Disposal <br />Product residues can be disposed of in accordance with disposal code AVV 17 01 01.</p> <p>Notes <br />When laying natural stone and synthetic stone, the product-specific properties of the coating materials (tendency to discolour, risk of curling, <br />etc.) and the laying recommendations of the manufacturer must be taken into account. We recommend carrying out trial laying! <br />Rooms, surfaces and building components that expect water exposure after DIN 18534, DIN 18531 and DIN 18535 must be protected <br />by bonded waterproofing. <br />Calcium sulphate screeds must be protected with the ASO®-Unigrund-GE, ASO®-Unigrund-K or ASO®-Unigrund-PLUS primers prior to <br />laying. Calcium sulphate screeds must be protected with a barrier primer (e.g. ASODUR®-GBM) when laying large format tiles. <br />Do not stir or add water to existing material that has already set in order to make it workable again. <br />Use a barrier primer such as ASODUR®-GBM to protect substrates that are sensitive to moisture, such as magnesite screeds, from direct <br />contact. <br />Protect the product from water, frost, draughts, direct sunlight and mechanical loads until it has dried completely.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />3/4</p> <p>12/06/2025</p> <p>Technical data sheet <br />MONOFLEX <br />Relevant regulations <br />Planning, inspection of substrates and building site circumstances, laying, grouting and subsequent <br />care of the work must be done in accordance with the relevant DIN standards and recognised rules of <br />technology (e.g. the ZDB Data sheets of the Zentralverband Deutsches Baugewerbe e.V.(German <br />construction Association) in the latest version. <br />Observe applicable safety data sheet! <br />GISCODE: ZP1 <br />Explanations <br />Conformity / Declaration / Verification</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you <br />in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description <br />does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />4/4</p> <p>12/06/2025</p>
