SCHOMBURG GmbH & Co. KG Aquafinstrasse 2–8 D-32760 Detmold (Germany) phone + 49-5231- 953-00 fax + 49-5231- 953-108 email export@schomburg.de www.schomburg.com
Technical Data Sheet
UNIFLEX®-F
Art. no. 2 04307
Liquid polymer for modifying tile adhesive Component B of UNIFIX-S3, UNIFIX-S3-fast Substrate: See the technical data sheet of the combined product.
• polymer modified • solvent-free • flexible
Application: Put UNIFLEX-F into a clean mixing bucket and stir it with the respective powder component to produce a homogenous, lump-free bulk density. With a strong stirrer (approx. 500– 700 min-1), a mixing time of approx. 2–3 min. is required. To set the product-specific consistency, water may also be added. After a maturing time of approx. 3 minutes, the mixture is stirred again intensively. The technical data sheets for the respective adhesive that is used are binding for application.
Areas of use: UNIFLEX-F is liquid polymer component for elastic tile adhesives on critical and deformable substrates, for production of: • Highly deformable flex adhesive with SCHOMBURG tile adhesives, e.g. UNIFIX-S3 powder component, UNIFIX-S3-fast power component, ADF-Systemkleber-FB, AK7P, CRISTALLIT-FLEX, CRISTALLIT-MULTI-FLEX, CRISTALLIT-VARIO-light, LIGHTFLEX, MONOFLEX, MONOFLEX-FB, MONOFLEX-XL, SOLOFLEX, SOLOFLEX-fast, UNIFIX-AEK. • Combined products may be used both inside and outside.
Elastic tile adhesive: UNIFLEX-F as a combined product with tile and natural stone adhesive for improved adhesion and deformation. To produce highly deformable tile adhesive, 5 kg to 8.33 kg are normally added to 25 kg powder or 15 kg in case of LIGHTFLEX and CRISTALLIT-VARIO-light.
Technical data: Basis: Polymer dispersion Colour: white pH value: approx. 9.8 Reaction to fire: E (as a combined product) Application/ substrate temp.: +5 °C to +30 °C Pot life*): approx. 60 min, independent of the combined product used. Packaging: 5 and 8.33 kg canister Storage: Frost-free, min. 12 months in the original unopened container, use opened container immediately Consumption: According to the respective technical data sheets of the tile adhesive Cleaning: Building components or tools fouled with UNIFLEX-F or a combined product must be cleaned immediately with water. Dried material can only be removed mechanically.
Important instructions: • Surfaces that should not be treated must be protected against the effects of UNIFLEX-F. • The combined products must be protected against wet and water influences until they have hardened. Please observe valid EU safety data sheets! GIS CODE: ZP1 (powder components) GIS CODE: D1 (UNIFLEX-F liquid component)
*) This value applies to +23 °C and 50% relative humidity. The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid if a new version is issued. 1/1
WKD/TAN/TM
22/18