ASOCRET-BM TM engl_2513.pdf
1 ページ
47キロバイト
Download
<h1>ASOCRET-BM TM engl_2513.pdf</h1> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2–8 <br />D-32760 Detmold - Germany <br />phone + 49-5231- 953-00 <br />fax <br />+ 49-5231- 953-108 <br />mail export@schomburg.de <br />www.schomburg.de/en</p> <p>Technical Data Sheet</p> <p>ASOCRET-BM <br />Mortar for filling drill holes and voids</p> <p>Properties: <br />• Pre-blended mortar <br />• Highly fluid <br />• Hardens without shrinkage <br />• Highly capillary absorbent <br />• For interior and exterior use <br />Areas of application: <br />ASOCRET-BM is used to fill voids in masonry work, <br />especially when producing horizontal waterproof <br />barriers in masonry with many fissures. Bore holes are <br />sealed with ASOCRET-BM after injecting with e.g. <br />AQUAFIN-F. Voids can be sealed by gravity or under <br />pressure. <br />Technical Data: <br />Basis: lime/cement <br />Colour: grey <br />Particle size: <br />≤ 0.5 mm <br />Bulk density: <br />0.9 kg/dm3 <br />Apparent density: <br />approx. 2.0 kg/dm3 <br />Slump: <br />approx. 30 cm <br />Pot life: <br />approx. 1 hr at +20° C <br />Material demand: <br />1.4 kg per litre of void <br />Application / <br />substrate temperature: <br />+5° C to +30° C <br />Strength: <br />1 day = 4 N/mm² <br /> <br />7 days = 10 N/mm² <br /> <br />28 days = 15 N/mm² <br />Storage: <br />min. 12 months when stored <br /> <br />cool and dry in the original <br /> unopened packaging. Use <br /> opened packaging promptly. <br />Packaging: <br />25 kg packs</p> <p>Art.-No. 2 05518</p> <p>Substrate preparation: <br />The substrate to be filled may not contain gypsum. <br />Free drill holes from drilling dust. <br />Product preparation: <br />Place ASOCRET-BM and approx. 8.0 litres of clean <br />water into a bucket and mix with a stirrer (approx. <br />300 – 700 rpm) for 2 – 3 minutes until lump free. <br />Fill out into the correctly positioned drill holes in <br />the masonry work either without pressure or under <br />pressure via special packers. If the following horizontal <br />waterproof barrier is also to be applied without <br />pressure, then the ASOCRET-BM must harden first. Drill <br />out the filled bore holes and fill to saturation with the <br />injection material. Alternatively the material can also <br />be used with suitable multi-stage packers. Refer to the <br />instructions given by the relevant manufacturer. <br />Advice: <br />• Protect areas not being treated from ASOCRET-BM. <br />• Gypsum or loam containing as well as aerated <br />concrete blocks are not suitable for injection. <br />Please observe a current valid EU Health & <br />Safety Data Sheet. <br />GISCODE: ZP1</p> <p>This technical data sheet is a translation from the German language version and does not consider local building codes or legal requirements. It shall be used as general <br />reference for the product. Legally binding is only the German technical data sheet or the latest Data sheet from one of our foreign subsidiaries inside their sales territory. <br />25/13 SF/CoS/JD</p>
