AQUAFIN-CJ2 TM engl.pdf
1 Halaman
36.9 KB
Download
<h1>AQUAFIN-CJ2 TM engl.pdf</h1> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2 – 8 <br />D-32760 Detmold - Germany <br />phone + 49 - 5231- 953- 00 <br />fax <br />+ 49 - 5231- 953-108 <br />mail export@schomburg.de <br />web www.schomburg.de/en</p> <p>Building <br />SCHOMBURG Product <br />Systems</p> <p>Technical Data Sheet</p> <p>AQUAFIN®-CJ2</p> <p>Art.-No. 2 07202</p> <p>Injection tube for the waterproofing <br />construction joints in concrete – double wall injection system <br />Properties: <br />• Officially approved for the use in system with <br />AQUAFIN-P-resins. <br />• Injectable with all common injection media. <br />• Repeatedly injectable. <br />• The injection tube is continuously marked with meter <br />units and controll number. <br />• Decrease of the internal friction of the injection media <br />for economic injection lengths. <br />• Easy to handle by special fixing system. <br />• No twisting when installed from the roll. <br />• The injection material escapes from the tube system <br />already at usual pressure (opening pressure = 0.5 <br />bar), so that the material can escape to all sides. <br />• The smooth surface avoids unwanted bonding <br />between tube and concrete. <br />Areas of application: <br />Double walled, PVC based tube with valve openings <br />allowing injected resins to escape from the tube into <br />construction joints for effective sealing and <br />waterproofing of the joints. The valve openings on the <br />inner and outer tubes are off-set to prevent cement lime <br />from entering the tubes during concreting and causing <br />clogs. The tubes are used for waterproofing <br />construction joints subject to continuous or interrupted <br />water penetration from ground or surface water. Once <br />water enters the joints, the tubes can be injected with <br />waterproofing grouts such as AQUAFIN-P1 or P4, <br />creating a watertight seal within the joint.</p> <p>Technical Data: <br />Basis: <br />Colour: <br />Interior ø: <br />Exterior ø: <br />Injection media:</p> <p>Max. injection length: <br />Size of the outlet in <br />the exterior tube: <br />Outlet distribution in <br />the interior tube: <br />Weight: <br />Packaging: <br />Storage:</p> <p>PVC <br />green <br />6 mm <br />11 mm <br />PU-resin, PU-foam resin, EPresin, acryxlates (only <br />ayrylates without any <br />corrosion increasing <br />properties), cement lime, fine, <br />ultrafine and finest cements <br />12 to 15 m <br />5 mm <br />all 20 mm turned by 90° <br />0.11 kg/m <br />rolls of 100 m shrinked in foil, <br />pallet contents = 2.500 m <br />frost free, protect against UV <br />rays, max. 5 years in original <br />packs.</p> <p>This technical data sheet is a translation from German and does not consider local building codes or legal requirements. It shall be used as general reference for the product. <br />Legally binding is only the latest German technical data sheet or the latest data sheet from one of our foreign subsidiaries inside their sales territory. <br />35/09 HS/AF/ED/JD</p>
