ASO-Unigrund-GE Technical Data Sheet EN 2217.pdf
1 Halaman
128 KB
Download
<h1>ASO-Unigrund-GE Technical Data Sheet EN 2217.pdf</h1> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2 – 8 <br />D-32760 Detmold (Germany) <br />phone + 49 -5231- 953-00 <br />fax <br />+ 49 -5231- 953-108 <br />email export@schomburg.de <br />www.schomburg.com</p> <p>Technical Data Sheet</p> <p>ASO®-Unigrund-GE </p> <p>Art.-No. 2 05536</p> <p>Ready to use primer</p> <p>Packaging: 1, 5, 10, 25 and 210 litre containers <br />Consumption: approx. 200 g/m²</p> <p>v er</p> <p>y lo</p> <p>io n</p> <p>• Rapid drying <br />• Universal application <br />• Resistant to water and alkalis <br />• Solvent free</p> <p>w e m is</p> <p>s</p> <p>Areas of application: <br />ASO-Unigrund-GE reduces the absorption of substrates, <br />binds surface dust, consolidates, prevents rapid water loss <br />from levelling compounds. <br />ASO-Unigrund-GE is used for priming absorbent and <br />lightly sanded substrates e.g. gypsum-based construction <br />materials (plaster, interlocking gypsum slabs, boards, <br />screeds), concrete, masonry work and similar. Suitable <br />as an adhesion promoter for surface applied waterproof <br />membranes (e.g. SANIFLEX, AQUAFIN-2K/M), thin-bed <br />adhesives such as LIGHTFLEX, MONOFLEX-XL, <br />SOLOFLEX, AK7P, UNIFIX as well as wall and <br />floor levelling compounds such as SOLOCRET-15, <br />SOLOPLAN-30-PLUS and ASO-NM15. It is also suitable <br />for exterior use. ASO-Unigrund-GE is suitable for use in <br />interior rooms in accordance with the French VOC by-law <br />and the Belgian royal decree C-2014/24239. Very low <br />emissions in accordance with GEV-EMICODE, which as a <br />rule leads to positive evaluations within the framework of <br />building certification systems in accordance with DGNB, <br />LEED, BREEAM, HQE. Highest quality level 4, rows <br />2,3,8,9 in accordance with the DGNB criterion “ENV 1.2 <br />local environmental impact“. <br />Technical Data: <br />Basis: <br />acrylate dispersion <br />Colour: <br />coloured green <br />Application/substrate <br />temperature: +5° C to +30° C <br />Specific gravity: 1.0 g/cm3 <br />Cleaning: <br />whilst still fresh, with water <br />Storage: frost free, 15 months in the original <br />unopened packaging. Use opened <br />packaging promptly.</p> <p>Substrate preparation: <br />The substrate must be load-bearing, clean, dry and free <br />from materials, which will impede adhesion. Flow screeds <br />must be abraded and vacuumed. Remove unstable or <br />weakly bonded layers e.g. release agents, residues of old <br />adhesive, levelling layers, surface finishes and paints, by <br />mechanical scrubbing, planing, scabbling or shot-blasting. <br />Product preparation: <br />ASO-Unigrund-GE is ready to use. Application is with a <br />paint brush, brush or a fine-pored sponge roller but it can <br />also be sprayed with suitable equipment. Avoid applying <br />too thickly or forming puddles. <br />ASO-Unigrund-GE must be fully dry before further work <br />can be carried out on the primed surface. <br />Advice: <br />• The primer must be dry before applying the next coat. <br />• Protect areas not being treated with ASO-Unigrund-GE. <br />• Do not apply wet in wet. <br />• Wash off splashes immediately. <br />Please observe a current valid EU Safety Data Sheet. <br />GISCODE: M-GP01</p> <p>Information about the emission level of volatile compounds in indoor <br />air, which pose a health risk by inhalation, on a scale from class A+ <br />(very low emissions) to C (high emissions).</p> <p>This technical data sheet is a translation from the German language version and does not consider local building codes or legal requirements. It shall be used as general reference for the <br />product. Legally binding is only the German technical data sheet or the latest Data sheet from one of our foreign subsidiaries inside their sales territory.</p> <p>1/1</p> <p>WKD/CoS/TM</p> <p>22/17</p>
