SCHOMBURG GmbH & Co. KG Aquafinstrasse 2 – 8 D-32760 Detmold (Germany) phone + 49 -5231- 953-00 fax + 49 -5231- 953-108 email export@schomburg.de www.schomburg.com
Technical Data Sheet
ESCOSIL®-2000
Art.-No. 2 05590
Silicone joint sealant
Areas of application: ESCOSIL-2000 is used in sanitary applications for sealing movement and connecting joints between tiled finishes and wash-basins, bath-tubs, shower trays, architraves and window frames. Not suitable for aquariums. For joints in natural stone use ESCOSIL-2000-ST. For joints in underwater applications use ESCOSIL-2000-UW.
Colours: white, manhattan, silver grey, jasmine, pergamon, cement grey, graphite, titan grey, medium grey, transparent, beige, caramel, jura beige, brown, nut brown, grey Consistency: paste Specific gravity: approx. 1.0 g/cm3 Application temp: +5 °C to +35 °C Skin formation: approx. 8 – 12 minutes at +23°C and 50% relative humidity Curing after 1 day: approx. 2 – 3 mm at +23 °C and 50% relative humidity Shore-A-hardness: approx. 18-22 acc. to DIN 53505 E module: approx. 0.35 – 0.40 N/mm2, at 100% to ISO 37, S3A Permissible movement accommodation: 25% Tensile strength: approx. 1.2 – 1.5 N/mm2 to ISO 37, S3A Elongation at break: approx. 400 – 600 % to ISO 37, S3A Temperature resistance: - 40 °C to +180 °C Storage: dry and cool, 24 months in the original unopened packaging. Use opened packaging promptly. Packaging: 310 ml, polyethylene cartridges, (310 ml x 12 tubes per box) Cleaner: ASO-R001 when in the fresh state Reaction to fire: Construction class B2
Technical Data: Basis: pure, unmodified acetate curing silicone sealant
Substrate preparation: The areas of contact must be dry (concrete < 4 % moisture), clean, dust free as well as free from constituents
v er
y lo
io n
1213 SCHOMBURG GmbH & Co. KG Aquafinstrasse 2 –8 D-32760 Detmold 2014 2 05590
w e m is
s
EN 15651-3 ESCOSIL-2000 1 component silicone sealant, acetoxy cure for use in sanitary areas - Type S - Conditioning: method A - Carrier material: glass - Pretreatment: OTTO Cleanprimer 1226 Reaction to Fire
Class E
Release of hazardous materials and/or chemicals harmful to the environment
evaluated
Water- and air-tightness a) Stability b) Loss of volume c) tensile behaviour i.e. elongation under pre-stressing after immersion in water h) Microbiological growth
passed (NF) 0
Durability
passed (NF)
≤ 3 mm ≤ 10 %
• One component. • Non slump. • Smooth paste consistency. • Contains fungicide. • Elastic. • Weather-, UV- and ageing-resistant. • Watertight. • Resistant to chemicals and chlorine. • For walls and floors.
1/3
25/17
that work as separating agents (e.g. oil, grease, paint residues, sealers, cement slurries etc.). Also no moisture should penetrate the ESCOSIL-2000 from the edges or from the joint base during the curing process. • With smooth impervious substrates e.g. glass and glazed ceramic no primer is necessary. • With rough, porous mineral-based substrates e.g. concrete, aerated concrete, Eternit, render and brickwork, prime the joint edges with a suitable primer, such as OTTO-CHEMIE Primer 1225. • With aluminium due to varying factory surface treatments, site trials should be carried out and if necessary prime with AG70. • For application on other metals as well as painted and plastic surfaces and with wood individual site trials should be carried out and if necessary prime with AG70. Oil, tar and bitumen containing backing strips are not suitable nor are natural rubber, chloroprene or EPDM based materials. Product application: Filling of the joint with ESCOSIL-2000 may be carried out once the primer has dried. The general jointing technology regulations must be followed. The surface of the applied sealant can be subsequently smoothed, i.e. before it has formed a skin, with soapy water and a suitable tool. Hereby the material is pressed in the joint and onto the contact surfaces.
Advice: • Protect areas, which are not to be treated from the effects of ESCOSIL-2000. • Avoid skin contamination and remove with soap and water as necessary. • Avoid contact with eyes or mucous membranes with the uncured silicone sealant ESCOSIL-2000. • Thoroughly rinse eyes with plenty of water and seek medical attention. • Avoid prolonged and repeated skin contact. • Strictly adhere to all safety measures for handling solvent-based lacquers and solvents when using primer AG70. • When using acid cleaners ensure that subsequently an alkaline environment is produced as the danger of mould/mildew is increased with their application. • AG70 For an improved adhesion of silicone systems to metal, concrete slabs and to natural stone. In combination with metals such as e.g. iron which corrode on contact with acetic acid use ESCOSIL-2000-ST or ESCOSIL-2000-UW. In combination with concrete blocks and natural stone use ESCOSIL-2000-ST. • The current IVD data sheets are to be observed. Please observe a current EU safety data sheet.
Information about the emission level of volatile compounds in indoor air, which pose a health risk by inhalation, on a scale from class A+ (very low emissions) to C (high emissions).
2/3
Priming table: Substrates
ESCOSIL-2000 sanitary silicone
Acrylic (bath tubs)
AG70
Aluminium untreated
–
Aluminium, anodised
Concrete
×
Lead
Chrome
Iron, abraded
Stainless steel, rust free
Tiles, glazed
Tiles, unglazed
Glass
Wood, glazed
Wood, varnished
Synthetic stone
Copper
Plastic (profiles)
Melamine resin
Brass
Natural stone
Polyester
PVC
Sandstone
Thinplate
× = not suitable – = not required
Consumption table: Joint dimensions and consumption (approx.) in m per 310 ml cartridge Joint width in mm 5
7
10
12
15
20
25
Joint depth in mm 5.0 7.0 10.0
12.0 m
8.0 m 6.0 m
6.0 m 4.0 m
3.0 m
2.5 m
2.0 m
1.5 m
2.1 m
1.7 m
1.2 m
1.0 m
1.3 m
0.8 m
12.0 15.0
This technical data sheet is a translation from the German language version and does not consider local building codes or legal requirements. It shall be used as general reference for the product. Legally binding is only the German technical data sheet or the latest Data sheet from one of our foreign subsidiaries inside their sales territory.
3/3
WKD/CoS/TM