FIX-20-T_GB_TM_1017.pdf
2 Halaman
49.9 KB
Download
<h1>FIX-20-T_GB_TM_1017.pdf</h1> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2 – 8 <br />D-32760 Detmold (Germany) <br />phone + 49 -5231- 953-00 <br />fax <br />+ 49 -5231- 953-108 <br />email export@schomburg.de <br />www.schomburg.com</p> <p>Technical Data Sheet</p> <p>FIX 20-T</p> <p>Rapid setting swellable waterproofing membrane <br />and plugging mortar</p> <p>• Chloride free, without components which <br />cause corrosion <br />• Highly reactive rapid mortar <br />• Strong bond to concrete substrates <br />• Rapid setting – also under water <br />• Compatible with the crystalline waterproofing <br />system AQUAFIN-IC <br />• For interior and exterior use <br />Areas of application: <br />FIX 20-T is a particularly rapid setting cement-based <br />mortar for sealing water-bearing holes, splits, cracks in <br />concrete, masonry work and natural stone constructions. <br />Flowing water is stopped within seconds supported by <br />the integrated swelling power. The strong adhesion to <br />the substrate ensures a durable seal to the leaking area. <br />• Immediate seal to water leaks and areas of seepage <br />in cellars, shafts, ducts etc. <br />• Repair to concrete areas before the application of a <br />waterproofing system (such as e.g. AQUAFIN-IC) <br />• For fixing wall anchors and other mounted parts that <br />need to be in service shortly <br />Technical Data: <br />Basis: <br />cement, additives <br />Colour: <br />cement grey <br />Bulk density: <br />approx. 1.4 kg/dm3 <br />Application/substrate <br />temperature: <br />+5° C to +35° C <br />Pot life: <br />approx. 2 – 3 minutes *) <br />Setting commences: <br />approx. 3 – 5 minutes *) <br />Consumption: <br />approx. 2 kg per litre of void <br />Storage: dry, 12 months in the original <br />unopened packaging. Use up <br />opened packaging soon after <br />opening. <br />Packaging: <br />6 kg and 2 kg plastic buckets</p> <p>Art.-No 2 01817</p> <p>Strength development: <br />Compressive strength <br />After 0.5 hours: <br />approx. 3.0 N/mm2 <br />After 24 hours: <br />approx. 15.0 N/mm2 <br />After 28 days: <br />approx. 30.0 N/mm2 <br />Substrate preparation: <br />The substrate must be sound, stable, clean and free <br />from adhesion inhibiting substances. Loose render <br />and masonry sections are to be removed. To improve <br />anchoring of FIX 20-T before plugging the running area, <br />chop out as necessary in the form of a swallow tail (min. <br />3 cm deep). <br />Product application: <br />Firstly mix the powder homogenously with approx. 25% <br />water to a workable mortar. Do not mix more mortar <br />than can be used within 2 minutes. Plugging running <br />water areas is achieved by pressing the mortar into <br />the void until the material has hardened. Push in by <br />hand. Hardening can be recognized by a significant <br />temperature raise. <br />In the case of high water pressure it may be necessary <br />to divert the water by inserting a hose or pipe to <br />minimise the water pressure and to ease the plugging <br />process. For this application the area of strongest water <br />flow must be chopped out deeper followed by fixing a <br />hose or pipe with FIX 20-T mortar. Following adequate <br />drying the hose or pipe is removed and the remaining <br />hole plugged with mortar as described above.</p> <p>*) The figures are based on +23°C and 50% relative humidity. Site and <br />weather conditions can extend or shorten the given data.</p> <p>1/2</p> <p>10/17</p> <p>Advice: <br />• Protect areas not to be treated with FIX 20-T from its <br />effects. <br />• Carry out appropriate trials first. <br />• At low temperatures use water as warm as possible <br />as well as warmed powder. At high temperatures <br />use water as cool as possible and cooled powder. <br />In general the temperature of the powder should not <br />exceed +23° C. <br />• FIX 20-T may not be mixed with gypsum or be brought <br />into contact with it. <br />• When using the product, personal safety measures <br />must be met (e.g. suitable gloves, protective glasses <br />etc.). <br />Please observe a valid EU Health & Safety data sheet. <br />GISCODE: ZP1</p> <p>This technical data sheet does not consider local building codes or legal requirements. It shall be used as general reference for the product, based on our current <br />knowledge and experience. Legally binding is only the latest Data Sheet from one of our foreign subsidaries inside their sales territory. In any case of uncertainty please <br />consult our technical department for further information. <br />2/2</p> <p>SF/CoS/TM</p> <p>10/17</p>
