REMIPLAST-P80_GB_TM_1205.pdf
1 Halaman
40.2 KB
Download
<h1>REMIPLAST-P80_GB_TM_1205.pdf</h1> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2–8 <br />D-32760 Detmold (Germany) <br />phone + 49-5231- 953-00 <br />fax <br />+ 49-5231- 953-333 <br />email export@schomburg.de <br />www.schomburg.com</p> <p>REMIPLAST-P80</p> <p>Technical Data Sheet</p> <p>Concentrated, plasticizing screed admixture</p> <p>Fields of Application: <br />REMIPLAST-P80 is particularly suited for high-quality, <br />floating and composite floor screed – cementitious or <br />anhydride based. <br />The product is recommendable for use with heated <br />screed and for use with conveyor equipment. <br />REMIPLAST-P80 favours the production of screeds with <br />good workability and low water-cement-ratios. <br />Properties and Benefits: <br />Screeds, modified with REMIPLAST-P80, are <br />characterized by the following properties: <br />• plastic workability consistence <br />• reduced water demand of up to10 % <br />• increased compressive and bending tensile strength <br />• reduced bleeding on the screed surface. <br />Technical Data: <br />Raw material base: <br />blend of surfactants, <br /> <br />free from chlorides <br />Colour: <br />black to brown <br />Form: liquid <br />Density: <br />1.13 g/cm3 <br />Storage: <br /> protect against frost and dirt <br />Shelf-life: <br />24 months at + 20° C in <br /> <br />original packaging <br />Delivery: <br />1.100 kg IBCs <br /> <br />200 kg drums <br /> <br /> <br />25 kg cans</p> <p>Art.-No. 401464 </p> <p>Instructions for Use: <br />BETOFIX P10 is best added to the ready mix as the last <br />component. The dosage together with the gauging water <br />is also possible when cleared in practical tests. Mixing <br />times depend on the type of mixer and have to be <br />adjusted, if necessary. Sufficient final mixing times have <br />to be secured in each case. <br />Special Advice: <br />• Suitability tests accord. to valid standards and norms <br />should be carried out prior to usage. <br />• Excessive gauging water quantities must be avoided. <br />• Only suitable aggregates must be used at a sufficient <br />content of binding agent. <br />Safety Advice: <br />Please adhere to the European <br />Safety Data Sheet (MSDS)!</p> <p>Recommended Dosage Range: <br />0.2 to 0.7 % on CEM <br />The final dosage quantity depends, among others, on the <br />reactivity of the cement and the mortar recipe. This must <br />be determined in suitable trials. <br />A higher dosage quantity may be necessary for cements <br />which tend to bleed. <br />Overdosages may result in a sticky appearance of the <br />fresh screed and require corresponding adjustment.</p> <p>This technical data sheet is a translation from German and does not consider local building codes or legal requirements. It shall be used as general reference for <br />the product. Legally binding is only the German technical data sheet or the latest Data sheet from one of our foreign subsidiaries inside their sales territory.</p> <p>12/05 RL/JD</p>
