ESCOSIL-2000 Technical Data Sheet EN 2517.pdf
3 หน้า
179 กิโลไบต์
Download
<h1>ESCOSIL-2000 Technical Data Sheet EN 2517.pdf</h1> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2 – 8 <br />D-32760 Detmold (Germany) <br />phone + 49 -5231- 953-00 <br />fax <br />+ 49 -5231- 953-108 <br />email export@schomburg.de <br />www.schomburg.com</p> <p>Technical Data Sheet</p> <p>ESCOSIL®-2000 </p> <p>Art.-No. 2 05590</p> <p>Silicone joint sealant</p> <p>Areas of application: <br />ESCOSIL-2000 is used in sanitary applications for <br />sealing movement and connecting joints between <br />tiled finishes and wash-basins, bath-tubs, shower trays, <br />architraves and window frames. <br />Not suitable for aquariums. For joints in natural <br />stone use ESCOSIL-2000-ST. For joints in underwater <br />applications use ESCOSIL-2000-UW.</p> <p>Colours: white, manhattan, silver grey, <br />jasmine, pergamon, cement <br />grey, graphite, titan grey, <br />medium grey, transparent, beige, <br />caramel, jura beige, brown, nut <br />brown, grey <br />Consistency: <br />paste <br />Specific gravity: <br />approx. 1.0 g/cm3 <br />Application temp: <br />+5 °C to +35 °C <br />Skin formation: approx. 8 – 12 minutes at <br />+23°C and 50% relative <br />humidity <br />Curing after 1 day: approx. 2 – 3 mm at +23 °C <br />and 50% relative humidity <br />Shore-A-hardness: approx. 18-22 acc. to <br />DIN 53505 <br />E module: approx. 0.35 – 0.40 N/mm2, <br />at 100% to ISO 37, S3A <br />Permissible movement <br />accommodation: <br />25% <br />Tensile strength: approx. 1.2 – 1.5 N/mm2 <br />to ISO 37, S3A <br />Elongation at break: approx. 400 – 600 % <br />to ISO 37, S3A <br />Temperature <br />resistance: <br />- 40 °C to +180 °C <br />Storage: dry and cool, 24 months in the <br />original unopened packaging. <br />Use opened packaging <br />promptly. <br />Packaging: 310 ml, polyethylene cartridges, <br />(310 ml x 12 tubes per box) <br />Cleaner: ASO-R001 when in the fresh <br />state <br />Reaction to fire: <br />Construction class B2</p> <p>Technical Data: <br />Basis: pure, unmodified acetate curing <br />silicone sealant</p> <p>Substrate preparation: <br />The areas of contact must be dry (concrete < 4 % <br />moisture), clean, dust free as well as free from constituents</p> <p>v er</p> <p>y lo</p> <p>io n</p> <p>1213 <br />SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2 –8 <br />D-32760 Detmold <br />2014 <br />2 05590</p> <p>w e m is</p> <p>s</p> <p>EN 15651-3 <br />ESCOSIL-2000 <br />1 component silicone sealant, <br />acetoxy cure for use in sanitary areas <br />- Type S <br />- Conditioning: method A <br />- Carrier material: glass <br />- Pretreatment: OTTO Cleanprimer 1226 <br />Reaction to Fire </p> <p>Class E</p> <p>Release of hazardous materials and/or <br />chemicals harmful to the environment </p> <p>evaluated</p> <p>Water- and air-tightness <br /> a) Stability <br /> b) Loss of volume <br />c) tensile behaviour i.e. elongation under <br />pre-stressing after immersion in water <br /> h) Microbiological growth </p> <p>passed (NF) <br />0</p> <p>Durability </p> <p>passed (NF)</p> <p>≤ 3 mm <br />≤ 10 %</p> <p>• One component. <br />• Non slump. <br />• Smooth paste consistency. <br />• Contains fungicide. <br />• Elastic. <br />• Weather-, UV- and ageing-resistant. <br />• Watertight. <br />• Resistant to chemicals and chlorine. <br />• For walls and floors.</p> <p>1/3</p> <p>25/17</p> <p>that work as separating agents (e.g. oil, grease, paint <br />residues, sealers, cement slurries etc.). Also no moisture <br />should penetrate the ESCOSIL-2000 from the edges or <br />from the joint base during the curing process. <br />• With smooth impervious substrates e.g. glass and <br />glazed ceramic no primer is necessary. <br />• With rough, porous mineral-based substrates e.g. <br />concrete, aerated concrete, Eternit, render and <br />brickwork, prime the joint edges with a suitable <br />primer, such as OTTO-CHEMIE Primer 1225. <br />• With aluminium due to varying factory surface <br />treatments, site trials should be carried out and if <br />necessary prime with AG70. <br />• For application on other metals as well as painted <br />and plastic surfaces and with wood individual site <br />trials should be carried out and if necessary prime <br />with AG70. <br />Oil, tar and bitumen containing backing strips are not <br />suitable nor are natural rubber, chloroprene or EPDM <br />based materials. <br />Product application: <br />Filling of the joint with ESCOSIL-2000 may be carried <br />out once the primer has dried. The general jointing <br />technology regulations must be followed. The surface <br />of the applied sealant can be subsequently smoothed, <br />i.e. before it has formed a skin, with soapy water and a <br />suitable tool. Hereby the material is pressed in the joint <br />and onto the contact surfaces.</p> <p>Advice: <br />• Protect areas, which are not to be treated from the <br />effects of ESCOSIL-2000. <br />• Avoid skin contamination and remove with soap and <br />water as necessary. <br />• Avoid contact with eyes or mucous membranes with <br />the uncured silicone sealant ESCOSIL-2000. <br />• Thoroughly rinse eyes with plenty of water and seek <br />medical attention. <br />• Avoid prolonged and repeated skin contact. <br />• Strictly adhere to all safety measures for handling <br />solvent-based lacquers and solvents when using <br />primer AG70. <br />• When using acid cleaners ensure that subsequently <br />an alkaline environment is produced as the danger of <br />mould/mildew is increased with their application. <br />• AG70 <br />For an improved adhesion of silicone systems to metal, <br />concrete slabs and to natural stone. In combination <br />with metals such as e.g. iron which corrode on contact <br />with acetic acid use ESCOSIL-2000-ST or <br />ESCOSIL-2000-UW. In combination with concrete <br />blocks and natural stone use ESCOSIL-2000-ST. <br />• The current IVD data sheets are to be observed. <br />Please observe a current EU safety data sheet.</p> <p>Information about the emission level of volatile compounds in indoor <br />air, which pose a health risk by inhalation, on a scale from class A+ <br />(very low emissions) to C (high emissions).</p> <p>2/3</p> <p>25/17</p> <p>Priming table: <br />Substrates</p> <p>ESCOSIL-2000 <br />sanitary silicone</p> <p>Acrylic (bath tubs)</p> <p>AG70</p> <p>Aluminium untreated</p> <p>–</p> <p>Aluminium, anodised</p> <p>AG70</p> <p>Concrete</p> <p>×</p> <p>Lead</p> <p>×</p> <p>Chrome</p> <p>AG70</p> <p>Iron, abraded</p> <p>×</p> <p>Stainless steel, rust free</p> <p>AG70</p> <p>Tiles, glazed</p> <p>–</p> <p>Tiles, unglazed</p> <p>–</p> <p>Glass</p> <p>–</p> <p>Wood, glazed</p> <p>AG70</p> <p>Wood, varnished</p> <p>–</p> <p>Synthetic stone</p> <p>×</p> <p>Copper</p> <p>×</p> <p>Plastic (profiles)</p> <p>–</p> <p>Melamine resin</p> <p>AG70</p> <p>Brass</p> <p>×</p> <p>Natural stone</p> <p>×</p> <p>Polyester</p> <p>–</p> <p>PVC</p> <p>AG70</p> <p>Sandstone</p> <p>×</p> <p>Thinplate</p> <p>AG70</p> <p>× = not suitable <br />– = not required</p> <p>Consumption table: <br />Joint dimensions and consumption (approx.) in m per 310 ml cartridge <br />Joint width in mm <br />5</p> <p>7</p> <p>10</p> <p>12</p> <p>15</p> <p>20</p> <p>25</p> <p>Joint depth in mm <br />5.0 <br />7.0 <br />10.0</p> <p>12.0 m</p> <p>8.0 m <br />6.0 m</p> <p>6.0 m <br />4.0 m</p> <p>3.0 m</p> <p>3.0 m</p> <p>2.5 m</p> <p>2.0 m</p> <p>1.5 m</p> <p>2.1 m</p> <p>1.7 m</p> <p>1.2 m</p> <p>1.0 m</p> <p>1.3 m</p> <p>1.0 m</p> <p>0.8 m</p> <p>12.0 <br />15.0</p> <p>This technical data sheet is a translation from the German language version and does not consider local building codes or legal requirements. It shall be used as general reference for the <br />product. Legally binding is only the German technical data sheet or the latest Data sheet from one of our foreign subsidiaries inside their sales territory.</p> <p>3/3</p> <p>WKD/CoS/TM</p> <p>25/17</p>
