ESCOSIL-2000-UW Technical Data Sheet EN 3318.pdf
3 หน้า
148 กิโลไบต์
Download
<h1>ESCOSIL-2000-UW Technical Data Sheet EN 3318.pdf</h1> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2–8 <br />D-32760 Detmold (Germany) <br />phone + 49-5231- 953-00 <br />fax + 49-5231- 953-108 <br />email export@schomburg.de <br />www.schomburg.com</p> <p>Technical Data Sheet</p> <p>ESCOSIL®-2000-UW </p> <p>Art.-No. 2 05591</p> <p>Silicone for underwater use</p> <p>• Non slump. <br />• Smooth paste consistency. <br />• Oxime-interlacing. <br />• High level of fungicide. <br />• Elastic. <br />• Resistant to weathering and ageing. <br />• Watertight. <br />• Resistant to chemicals and chlorine. <br />• For interiors and exteriors. <br />• For walls and floors. <br />• MEKO-free</p> <p>Storage: dry and cool, 12 months in the <br />original unopened packaging. Use <br />opened packaging promptly. <br />Packaging: polyethylene cartridges, 310 ml <br />contents <br />(310 ml x 12 tubes per box) <br />Cleaner: <br />ASO-R001 when in the fresh state <br />Substrate preparation: <br />The areas of contact must be dry (concrete < 4% <br />moisture), clean, dust free as well as free from constituents <br />that work as separating agents (e.g. oil, grease, paint <br />residues, sealers, cement slurries etc.). Also no moisture <br />should penetrate the ESCOSIL-2000-UW from the edges <br />or from the joint base during the curing process. <br />• With mineral-based substrates, such as for example <br />ceramic tiles, concrete etc. and zinc, treat the joint <br />edges with a suitable primer e.g. Primer 1218 from <br />OTTO-CHEMIE. <br />• When using with metal such as cast iron, aluminium, <br />galvanised metal etc., the joints edges should be <br />primed with AG70. <br />• For application on painted and plastic surfaces <br />individual site trials should be carried out! Oil, tar and <br />bitumen containing backing strips are not suitable <br />nor are natural rubber, chloroprene or EPDM based <br />materials.</p> <p>Areas of application: <br />ESCOSIL-2000-UW is used for the elastic jointing of <br />expansion and construction joints in swimming pools, <br />water features etc. or where an especially high fungicidal <br />performance is desired. <br />Not suitable for potable water or fish tanks. <br />Technical Data: <br />Basis: pure, unmodified, neutral curing <br />silicone sealant, silicone oils <br />Colours: <br />medium grey, cement grey <br />Consistency: <br />paste, non slump <br />Specific gravity: <br />approx. 1.05 g/cm3 <br />Application temp: +5 °C to +35 °C <br />Skin formation: approx. 6 minutes at +23°C <br />and 50% relative humidity <br />Curing after 1 day: approx. 2 – 3 mm at +23 °C <br />and 50% relative humidity <br />Shore-A-hardness: approx. 24 acc. to DIN 53505 <br />E module: approx. 0.35 N/mm2, <br />100% to DIN 53 504 <br />Movement <br />accommodation: 25% <br />Tensile strength: approx. 2.6 N/mm2 to DIN 53 504 <br />Elongation at break: approx. 450%, to DIN 53504 <br />Temperature <br />resistance: <br />- 40 °C to +180 °C</p> <p>Product application: <br />Filling of the joint with ESCOSIL-2000-UW may be <br />carried out once the primer has dried. The general jointing <br />technology regulations must be followed. The surface <br />of the applied sealant can be subsequently smoothed, <br />i.e. before it has formed a skin, with soapy water and a <br />suitable tool. Hereby the material is pressed in the joint <br />and onto the contact surfaces. The surface should not be <br />exposed to water until at least 4 days have elapsed.</p> <p>1/3</p> <p>33/18</p> <p>Advice: <br />Priming table: <br />• When using in swimming pools sufficient chlorine <br />disinfection measures must be in place to effectively <br />Substrates <br />prevent mildew and/or algae. Alternative measures <br />such as UV-radiation or ozone do not have sustained <br />Acrylic (bath tubs) <br />disinfecting efficiency. This is however indispensible to <br />Aluminium untreated <br />avoid the formation of mildew and/or algae. <br />Aluminium, anodised <br />• Constant water circulation has always to be in use and <br />Concrete <br />must never be interrupted, even for a short time. The <br />chlorine concentration must not fall below 0.3 mg/l, not Lead <br />Chrome <br />even in places. <br />Iron, abraded <br />• When using acid cleaners ensure that subsequently <br />an alkaline environment is produced as the danger of <br />Stainless steel, rust free <br />mould/mildew is increased with their application. <br />Glass <br />• Protect areas, which are not to be treated from the <br />Wood, glazed <br />effects of ESCOSIL-2000-UW. <br />Wood, varnished <br />• Avoid skin contamination and remove with soap and <br />Synthetic stone <br />water as necessary. <br />Copper <br />• Avoid contact with eyes or mucous membranes with the <br />Plastic (profiles) <br />uncured silicone sealant ESCOSIL-2000-UW. <br />Melamine resin <br />• Thoroughly rinse eyes with plenty of water and seek <br />Brass <br />medical attention. <br />• Avoid prolonged and repeated skin contact. <br />Natural stone <br />• Contains a blend of butanone oxime silanes and <br />Polyester <br />butanone oxime. May cause allergic reactions. Must <br />Aerated concrete <br />not be continuously inhaled as this may effect the health. <br />PVC <br />• Strictly adhere to all safety measures for handling <br />Soft PVC (membranes) <br />solvent-based lacquers and solvents when using primer <br />Sandstone <br />AG70. <br />Thinplate <br />• AG70: For an improved adhesion of silicone systems <br />to metal, concrete slabs and to natural stone. In <br />combination with metals such as e.g. iron which corrode × = not suitable <br />– = not required <br />on contact with acetic acid use ESCOSIL-2000-ST or <br />ESCOSIL-2000-UW. In combination with concrete <br />blocks and natural stone use ESCOSIL-2000-ST.</p> <p>ESCOSIL-2000-UW <br />Underwater silicone <br />– <br />AG70 <br />AG70 <br />× <br />× <br />AG70 <br />× <br />AG70 <br />– <br />× <br />× <br />AG70 <br />× <br />– <br />AG70 <br />× <br />× <br />× <br />× <br />AG70 <br />× <br />× <br />AG70</p> <p>Please observe a current EU safety data sheet.</p> <p>2/3</p> <p>33/18</p> <p>Consumption table: <br />Joint dimensions and consumption (approx.) in m per 310 ml cartridge <br />Joint width in mm <br />5</p> <p>7</p> <p>10</p> <p>12</p> <p>15</p> <p>20</p> <p>25</p> <p>Joint depth in mm <br />5.0</p> <p>12.0 m</p> <p>7.0 <br />10.0</p> <p>8.0 m</p> <p>6.0 m</p> <p>6.0 m</p> <p>4.0 m</p> <p>3.0 m</p> <p>3.0 m</p> <p>2.5 m</p> <p>2.0 m</p> <p>1.5 m</p> <p>2.1 m</p> <p>1.7 m</p> <p>1.2 m</p> <p>1.0 m</p> <p>1.3 m</p> <p>1.0 m</p> <p>0.8 m</p> <p>12.0 <br />15.0</p> <p>Information about the emission level of volatile compounds in indoor <br />air, which pose a health risk by inhalation, on a scale from class A+ <br />(very low emissions) to C (high emissions).</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you in the case <br />of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description does not release the <br />user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued. <br />3/3</p> <p>WKD/CoS/TM</p> <p>33/18</p>
