FIX-10-S_GB_TM_1017.pdf
1 หน้า
426 กิโลไบต์
Download
<h1>FIX-10-S_GB_TM_1017.pdf</h1> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2 – 8 <br />D-32760 Detmold (Germany) <br />phone + 49 -5231- 953-00 <br />fax <br />+ 49 -5231- 953-108 <br />email export@schomburg.de <br />www.schomburg.com</p> <p>Technical Data Sheet</p> <p>FIX 10-S </p> <p>Art.-No. 2 01819</p> <p>Plugging cement</p> <p>• Chloride free <br />• Highly reactive rapid setting cement <br />• Immediately starts to set upon addition of water <br />• For interior and exterior use <br />Areas of application: <br />Immediate waterproofing of water leaks, water <br />penetration and seepage in cellars, shafts, tunnels etc. <br />Technical Data: <br />Basis: cement, additives <br />Colour: cement grey <br />Bulk density: <br />approx. 1.2 kg/dm3 <br />Substrate/application <br />temperature: <br />+5° C to +30° C <br />Start of setting: <br />immediately after water <br /> addition <br />Consumption: <br />approx. 2 kg per litre of void <br />Storage: <br />dry, 12 months in the <br /> original unopened <br /> packaging. Use opened <br /> packaging promptly. <br />Packaging: <br />6 and 12 kg plastic buckets</p> <p>Product application: <br />Plugging of leaks can be achieved by pressing <br />FIX 10-S, in the dry form, into the leaking area by hand. <br />If the leaking area is not sealed by the first plugging <br />attempt, FIX 10-S can be applied again followed by <br />several coats of AQUAFIN-F, which is then included <br />within the surface applied waterproof membrane <br />selected. <br />Advice: <br />• Protect areas not being treated with FIX 10-S. <br />• Carry out appropriate preliminary tests. <br />• If the leakage area is large, we recommend the <br />AQUAFIN-1F and AQUAFIN-1K system. <br />• Do not mix FIX 10-S with or bring into contact <br />with gypsum. <br />Please observe a valid EU Health & Safety Data Sheet. <br />GISCODE: ZP1</p> <p>Substrate preparation: <br />The substrate must be sound, load-bearing, clean and <br />free from adhesion inhibiting materials. <br />Remove loose render and masonry sections. To improve <br />the anchoring of FIX 10-S, chop out the leaking area, as <br />necessary, to form a swallow tail before plugging.</p> <p>This technical data sheet is a translation from German and does not consider local building codes or legal requirements. It shall be used as general reference for the product. Legally binding is <br />only the latest German technical data sheet or the latest data sheet from one of our foreign subsidiaries inside their sales territory.</p> <p>1/1</p> <p>SF/CoS/TM</p> <p>10/17</p>
