SAVEMIX-2002_GB_TM_3516.pdf
1 หน้า
75.2 กิโลไบต์
Download
<h1>SAVEMIX-2002_GB_TM_3516.pdf</h1> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2–8 <br />D-32760 Detmold (Germany) <br />phone + 49-5231- 953-00 <br />fax <br />+ 49-5231- 953-108 <br />email export@schomburg.de <br />www.schomburg.com</p> <p>SAVEMIX®-2002 </p> <p>Technical Data Sheet</p> <p> </p> <p>Art.-No. 4 06455</p> <p>Highly effective plasticizer and wetting agent</p> <p>1488</p> <p>EN 934-2 <br />SAVEMIX-2002 <br />Plasticizer for concrete <br />EN 934-2:T2 <br />Chloride content <br />Alkali content <br />Corrosion behaviour </p> <p>max. 0.10 by weight <br />max. 2.6 by weight <br />Contains components only <br />from EN 934-1:2008, <br />Annex A. 1 <br />Compressive strength <br />Fulfilled <br />Reduced water demand <br />Fulfilled <br />Air content <br />Fulfilled <br />Dangerous substances <br />NPD</p> <p>NPD = „No Performance Determined“</p> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2–8 <br />D-32760 Detmold <br />15 <br />4 06455</p> <p>When using SAVEMIX-2002 in semi-dry mixes, an <br />improved compaction of the concrete is achieved through <br />its plasticizing action. The gel formation encouraged <br />leads to a better surface with fewer pinholes. Therefore <br />higher density and more homogenous concrete results, <br />as a rule in increased green and ultimate strengths. <br />With the finish on exposed aggregate concrete, a <br />homogenous grain texture and a more even wash-out is <br />achieved. Concrete produced with SAVEMIX-2002 is <br />easy to transport, install and compact. The potential water <br />saving permits the reduction of w/c values at the same <br />consistency or an increase in consistency at the same <br />w/c value. <br />Area of application: <br />• As a plasticizer for semi-dry concrete <br />• Concrete paving blocks <br />• Edging slabs (high set and deep set) <br />• Pipes <br />• Manhole rings and manhole sections <br />• Slatted floors <br />• As a plasticizer for exposed aggregate concrete <br />• Ready-mixed concrete <br />• Screed construction</p> <p>Technical data: <br />Colour: <br />dark brown <br />Consistency: <br />liquid <br />Density: <br />1.13 g/cm3 <br />Application temp.: from +5° C <br />Storage: frost free and dry, 6 month in the <br />original unopened packaging. Use <br />opened containers promptly. <br />Packaging: <br />1,100 kg container <br />Water hazard <br />class(WGK): <br />1 (self classification) <br />Dosage: <br />Recommended dosage range: 0.2–0.7 by weight. <br />The required dosage depends on the concrete formula <br />and the reactivity of the cement amongst others, and is to <br />be determined by performance trials. <br />Product preparation: <br />SAVEMIX-2002 is preferably added to the finished mix. <br />Addition to the gauging water is also possible but only <br />after suitability trials. The mixing time is dependent on the <br />mixer and must be adjusted appropriately. When dosing <br />in mixer trucks, ensure an even dispersion. As a guide <br />value: per m3 concrete 1 minute (however min. 5 minutes) <br />mix time. <br />Specific advice: <br />• Before use in concrete always carry out a performance <br />test to relevant standards. <br />Monitoring/accreditation: <br />Concrete super plasticizer to EN 934-2:T.2 Only contains <br />substances to EN 934-1:2012, Annex A1 <br />Please observe a valid EU safety data sheet.</p> <p>This technical data sheet is a translation from German and does not consider local building codes or legal requirements. It shall be used as general reference for <br />the product. Legally binding is only the German technical data sheet or the latest Data sheet from one of our foreign subsidiaries inside their sales territory.</p> <p>1/1</p> <p>TB/CoS/TM 35/16</p>
