SCHOMBURG GmbH & Co. KG Aquafinstrasse 2–8 D-32760 Detmold (Germany) phone + 49-5231- 953-00 fax + 49-5231- 953-108 email export@schomburg.de www.schomburg.com
Technical Data Sheet
RD-SK50
Art.-No. 2 05978
Self adhesive edge insulation strip
Substrate preparation: All usual substrates, which are suitable for applying levelling compounds and floor finishes and which have been professionally prepared. Prepare the substrate beforehand with a primer suitable for the intended system build-up. Allow the primer to dry.
• PE edge insulation strip • Self-adhesive foot with upright effect • Prevents sound bridges • Prevents mortar bridges • Especially suitable for renovation work Areas of application: RD-SK50 is used to eliminate sound and mortar bridges. RD-SK50 can be used in combination with levelling compounds, screeds and de-coupling systems e.g. SOLOPLAN-30-PLUS, ASO-NM15, SOLOPLAN-FA, SOLOCRET-15, SOLOCRET-50, the ASO-EZ product range and de-coupling systems such as STEPBOARD. RD-SK50 is equipped with a self-adhesive foot so that the edge insulation strip can be well positioned against rising building sections without leaving adhesive residues behind on the wall. Therefore mortar and sound bridges are eliminated. Suitable for the installation of tiles, parquet and laminate especially in the renovation of apartment blocks.
Product application: 1. R emove the protective film from the adhesive strip of the SK foot. 2. S tick the RD-SK50 with the SK foot to the prepared substrate and push into place with pressure. Cut through the SK foot when forming corners. Once fixed, the RD-SK50 presses against the wall thus eliminating sound bridges and mortar bonds. 3. A t junctions the RD-SK50 is butt jointed without a gap. Stick adhesive tape over the junctions, butt joints or cut areas. 4. S ubsequently further work, such as e.g. levelling with SOLOPLAN-30-PLUS, can be carried out.
Technical Data: Basis: PE foam with self-adhesive foot and fleece backing Packaging: 5 rolls of 20 m in a box Colour: grey with SCHOMBURG printed Thickness/height/ length: 5 mm/50 mm/20 m Application/substrate temperature: +5° C to +30° C Reaction to fire to DIN 4102: B2 Storage: dry, 12 months in the original unopened packaging
Advice: • Observe the Technical Data Sheets of all named products. • RD-SK50 may not be bonded or overcoated with solvented products. • The ability of the SK foot to cope with loads is limited. Therefore with high vehicular traffic or bonded constructions we recommend that its suitability for the type of application is checked. • Follow current relevant regulations such as e.g.: DIN 18157 DIN 18352 DIN 18560 EN 13813 DIN 1055
This technical data sheet is a translation from German and does not consider local building codes or legal requirements. It shall be used as general reference for the product. Legally binding is only the latest German technical data sheet or the latest data sheet from one of our foreign subsidiaries inside their sales territory.
1/1
WKD/CoS/TM
22/18