ADF-Pipe-Gasket Technical Data Sheet EN 4319.pdf
1 ទំព័រ
64.7 KB
Download
<h1>ADF-Pipe-Gasket Technical Data Sheet EN 4319.pdf</h1> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2–8 <br />D-32760 Detmold (Germany) <br />phone + 49-5231- 953-00 <br />fax + 49-5231- 953-108 <br />email export@schomburg.de <br />www.schomburg.com</p> <p>Technical Data Sheet</p> <p>ADF®-Pipe-Gasket</p> <p>Art. no. 2 05966</p> <p>To waterproof pipe penetrations</p> <p>Substrate: <br />The substrate must be professionally prepared. All <br />substrates must be firm, load-bearing, frost-free and <br />free from separating layers. Any damaged areas or <br />unevenness must be compensated with ASOCRET-M30. <br />Roughen plastic pipes present and then thoroughly clean <br />them with a suitable cleaner, e.g. acetone.</p> <p>• Composite material <br />• Resistant to alkalis <br />• Impermeable to water <br />• Water vapour resistant <br />• With prefabricated hopper for connection work <br />Areas of use: <br />The ADF-Pipe-Gasket is suitable for sealing pipe <br />penetrations in areas in direct contact with the ground <br />against soil moisture/non-standing seepage water in <br />waterproofing layers of COMBIDIC-2K-CLASSIC, <br />COMBIDIC-2K-PREMIUM, AQUAFIN-RB400, <br />AQUAFIN-RS300, AQUAFIN-2K/M-PLUS or <br />ASOFLEX-AKB, for example.</p> <p>Application: <br />Apply the respective waterproofing material to the <br />professionally prepared substrate and the plastic pipe <br />present, and work into the ADF-Pipe-Gasket without air <br />bubbles or wrinkles. Bonding must be carried out in such <br />a way that water cannot migrate around the back of the <br />ADF-Pipe-Gasket. After the drying process of the adhesive <br />layer, the suitable waterproofing can be applied with the <br />respective waterproofing system and must be applied to at <br />least 5 cm on the pipe penetration.</p> <p>Technical data: <br />Basis: Composite material made up of <br />fleece – membrane – fleece <br />Colour: <br />light grey <br />Thickness: <br />approx. 0.65 mm <br />Dimensions (W × L): <br />350 × 350 mm <br />Interior pipe diameter: approx. 110 mm <br />Tapered to: <br />approx. 90 mm <br />Collar height: <br />approx. 20 mm <br />Storage: Cool, dry, protected from <br />sunlight and weathering <br />influences, 24 months</p> <p>Notes: <br />• The recognised technical standards must be observed. <br />• The ADF-Pipe-Gasket must not be glued or overcoated <br />afterwards with products containing solvents.</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you in the case <br />of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description does not release the <br />user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued. <br />1/1</p> <p>SF/TET/KKa</p> <p>43/19</p>
