AQUAFIN-CJ1 TM engl_0213.pdf
1 စာမျက်နှာ
111 KB
Download
<h1>AQUAFIN-CJ1 TM engl_0213.pdf</h1> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2–8 <br />D-32760 Detmold - Germany <br />phone + 49-5231- 953-00 <br />fax <br />+ 49-5231- 953-108 <br />mail export@schomburg.de <br />www.schomburg.de/en</p> <p>AQUAFIN®-CJ1 </p> <p>Technical Data Sheet</p> <p>Art.-No. 2 07201 <br />Injection tube for waterproofing construction joints in concrete</p> <p>SCHOMBURG GmbH <br />Properties: <br />Detmold <br />• Injectable with all common <br />P-5032/9455 <br />injection media. <br />MPA Braunschweig <br />• Sufficient diameter of the transport <br />channel. <br />• Cement paste cannot enter the <br />tube during concreting. <br />• Easy to handle by special fixing <br />system. <br />• No twisting when installed from <br />the roll. <br />• The injection material escapes from the tube system <br />already at usual pressure (opening pressure = 0.5 <br />bar), so that the material can escape to all sides. <br />• The smooth surface avoids unwanted bonding <br />between tube and concrete so that the tube remains <br />compressible for years as it will not be closed by <br />sintering.</p> <p>Areas of application: <br />Single walled, PVC based tube with valve openings <br />allowing injected resins to escape from the tube <br />into construction joints for effective sealing and <br />waterproofing of the joints. The valve openings seal <br />during concreting to prevent cement lime from entering <br />the tubes and causing clogs. The tubes are used for <br />waterproofing construction joints subject to continuous <br />or interrupted water penetration from ground or surface <br />water. <br />Technically necessary construction joints can be installed <br />in case of leaks force-fitted and waterproof against <br />pressure water by injection of AQUAFIN-P4.</p> <p> </p> <p>Technical Data: <br />Basis: <br />Colour: <br />Interior ø: <br />Exterior ø: <br />Size of the outlet <br />in the tube: <br />Outlet distribution <br />in the tube: <br />Injection media: <br /> <br /> <br />Injection length: <br />Weight: <br />Packaging: <br /> <br />Storage: <br /> <br /> </p> <p>W-PVC <br />blue <br />6 mm <br />11 mm <br />3 - 5 mm <br />all 12 to 14 mm in graticules <br />resins, acrylates (acrylates <br />without any corrosion <br />increasing properties), gels <br />max. 12 m or on request <br />0.12 kg/m <br />rolls of 50 m, pallet <br />contents = 1.200 m <br />frost-free, protected against <br />weathering, max. 5 years in <br />original packs</p> <p>Important advice: <br />• Must be covered by at least 8 cm of concrete. <br />• Protect tubes against slippage and floating. This is <br />ensured by fixing to concrete by min. 5 clips/m. <br />• Tubes must lie flat and level on the concrete. There <br />must be no contamination beneath the waterstop. <br />• Before installing the concrete visually inspect tube. <br />Damaged or extremely dirty tubes are unsuitable and <br />must be removed.</p> <p>This technical data sheet is a translation from German and does not consider local building codes or legal requirements. It shall be used as general reference for the product. <br />Legally binding is only the latest German technical data sheet or the latest data sheet from one of our foreign subsidiaries inside their sales territory. <br />02/13 SF/PE/JD</p>
