ASO-LB Technical Data Sheet EN 0518.pdf
1 စာမျက်နှာ
67.7 KB
Download
<h1>ASO-LB Technical Data Sheet EN 0518.pdf</h1> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2–8 <br />D-32760 Detmold (Germany) <br />phone + 49-5231- 953-00 <br />fax + 49-5231- 953-108 <br />email export@schomburg.de <br />www.schomburg.com</p> <p>Technical Data Sheet</p> <p>ASO®-LB </p> <p>ASO®-Leitband/INDU-ConductiveStrip <br />Conductive (earthing) strip</p> <p>Art.-No. 2 05858</p> <p>Important Advice: <br />• Processing temperatures between +5° C and +35° C. <br />• Applications that are not clearly explained in this <br />technical data sheet may only be carried out after <br />consultation with and written confirmation from the <br />Technical Services Department of SCHOMBURG.</p> <p>• Single-sided copper foil. <br />• Single-sided self-adhesive. <br />• Electrically conducting. <br />Areas of application: <br />ASO-LB is used to create a secure connection between <br />horizontal conducting areas and earthing (potential <br />equalisation). <br />ASO-LB is used with the conductive coating <br />ASODUR-B3310 and with the polyurea based system <br />GEPOTECH-12/24. <br />Technical Data: <br />Packaging: 20 rm / roll <br />Storage: cool and dry, min.18 months in the original <br />unopened packaging, above +10° C up to <br />40° C. Use opended packagings promptly. <br />Method of application: <br />Bond the ASO-LB to the professionally pre-prepared and <br />primed substrate at a grid of max. 5 x 5 m (dependent on <br />the room geometry): <br />Pull the protective film from the adhesive, place the <br />band on to the substrate and push down firmly, whilst <br />avoiding folds and voids. At the floor/wall junction run the <br />ASO-LB potential connecting tags vertically up the wall by <br />approx. 1.0 m and stick in position. Then completely cover <br />the area where the ASO-LB has been installed, with the <br />conductive lacquer ASO-LL following the instructions in the <br />technical data sheet for ASO-LL. <br />Note: <br />The copper strip is to be connected on site to the earthing <br />conductor (potential equalisation).</p> <p>This technical data sheet is a translation from German and does not consider local building codes or legal requirements. It shall be used as general reference for the product. Legally binding <br />is only the latest German technical data sheet or the latest data sheet from one of our foreign subsidiaries inside their sales territory.</p> <p>1/1</p> <p>CJ/CoS/TM</p> <p>05/18</p>
