ASOCRET-VK100_GB_TM_0417.pdf
2 စာမျက်နှာများ
95.2 KB
Download
<h1>ASOCRET-VK100_GB_TM_0417.pdf</h1> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2–8 <br />D-32760 Detmold (Germany) <br />phone + 49-5231- 953-00 <br />fax + 49-5231- 953-108 <br />email export@schomburg.de <br />www.schomburg.com</p> <p>Technical Data Sheet</p> <p>ASOCRET-VK100</p> <p>INDUCRET-VK100 <br />Highly fluid mineral-based grouting mortar</p> <p>DIN EN 1504-6:2006-11 <br />ASOCRET-VK100 <br />Anchoring product <br />Pull out strength </p> <p>≤ 0.6mm</p> <p>Chloride ion content </p> <p>≤ 0.05%</p> <p>Reaction to fire <br />Dangerous substances </p> <p>A1 <br />NPD</p> <p>NPD= „No Performance Determinded“</p> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2–8 <br />D-32760 Detmold <br />16 <br />2 06417</p> <p>• Mineral-based <br />• For interior and exterior application <br />• Chloride free <br />• Highly fluid <br />• Resistant to frost and de-icing salts <br />• Water impermeable <br />ASOCRET-VK100 guarantees a strong adhesive bond to <br />concrete and asphalt subfloors. <br />Areas of application: <br />ASOCRET-VK100 is used as an adhesive grout for filling <br />voids from 20 to 100 mm deep e.g. for the void free <br />grouting of: <br />• Kerbstones (e.g. Dresden Combibord) <br />• Pre-cast concrete elements <br />• Machine foundations, supports etc. <br />• Crane rails <br />Furthermore for the void free grouting of: <br />• Recesses and joints in concrete <br />• Steel inserts and channels in concrete <br />• Anchor bolts.</p> <p> </p> <p>Art.-No. 2 06417</p> <p>Technical Data: <br />Particle size: <br />4.0 mm <br />Wet density of <br />fresh mortar*): <br />approx. 2.3 kg/dm3 <br />Consumption: <br />approx. 2.0 kg/dm3 <br />Water demand: approx. 3.5 l / <br />25 kg ASOCRET-VK100 <br />Pot life *): <br />approx. 60 minutes <br />Slump *): <br /> </p> <p>after 5 min. ≥ 550 mm <br />after 30 min. ≥ 450 mm</p> <p>Expansion rate *): <br />after 24 h ≥ +3.0 % <br /> by volume <br />Shrinkage rate *): <br /> after 28 days <br /> after 90 days <br />Compressive strength*): <br /> after 24 hrs <br /> after 28 days <br /> after 56 days <br /> after 90 days <br />Flexural strength *): <br /> after 24 hrs <br /> after 28 days <br /> after 56 days <br /> after 90 days </p> <p>approx. 1.4 mm/m <br />approx. 1.9 mm/m <br />approx. 50 N/mm2 <br />approx. 60 N/mm2 <br />approx. 70 N/mm2 <br />approx. 80 N/mm2 <br />approx. 6 N/mm2 <br />approx. 9 N/mm2 <br />approx. 10 N/mm2 <br />approx. 11 N/mm2</p> <p>Cleaning: <br />Thoroughly clean tools with <br /> water after use. <br />Packaging: <br />25 kg bags. <br />Storage: 12 months when stored <br />cool and dry in the original <br />unopened packaging. Use <br />opened packaging promptly. <br />*) These values relate to +23° C and 50% relative humidity. <br />**) PFT consistency testing tin on non absorbent substrate e.g. PE board, after <br />5 minutes. All specified data are indicative values, which are available <br />from laboratory and site experience.</p> <p>1/2</p> <p>04/17</p> <p>Substrate preparation: <br />The substrate must be load-bearing, sound, have a good <br />key and be free from materials detrimental to adhesion <br />such as e.g. dust etc. Remove all loose or poorly bonded <br />layers and repair back to a solid base including any <br />deep voids. Remove laitance layers using suitable <br />means e.g. high pressure washing, grit-blasting or hand <br />scabbling. Pre-wet the substrate so that it is matt damp at <br />the time ASOCRET-VK100 is applied. Avoid ponding. <br />Concrete quality: <br />min. C25/30 <br />Asphalt subfloors: <br />0/16 <br />Tensile adhesion <br />strength: <br />≥ 1.5 N/mm2 <br />Shuttering: <br />The shuttering used must be securely fixed and sealed as <br />necessary. <br />Product preparation: <br />Hand application: <br />For each 25 kg ASOCRET-VK100, approx. 3.5 l of <br />water is required. The use of a compulsory mixer is <br />recommended for mixing. Initially place approx. 3.2 l <br />water and 25 kg ASOCRET-VK100 in the mixer and mix <br />for approx. 3 minutes. Then add the remaining water <br />and mix for a further 2 minutes until homogenous and <br />free from lumps. The mixture is then ready for immediate <br />pouring. <br />Mechanical application: <br />ASOCRET-VK100 can be prepared in all conventional <br />conveyor pumps or continuous mixing pumps (e.g. <br />PFT G4 , PFT, Iphofen). To ensure correct operation <br />and trouble free service with the equipment, refer to the <br />relevant manufacturer’s instructions.</p> <p>Mechanical equipment: <br />Pipe length: max. 40 m <br />Pipe size: 25 - 35 mm <br />Stator/Rotor: D6-3 z <br />Secondary mixer: Rotormix for D pumps <br />Water quantity: approx. 325 – 350 l/h <br />Slump PFT consistency test tin: 58 ± 2 cm <br />Casting: <br />The casting or grouting is carried out exclusively from <br />one side or corner so that displaced air can escape. The <br />casting process should not be interrupted. <br />For casting procedures in large areas, it is recommended <br />to begin from the middle where possible. <br />Hoppers and/or appropriate hoses can be used to <br />assist the process. Firstly cast around anchoring recesses <br />(approx. up to the top of the anchor recess) and then <br />cast around machinery plates. <br />Important advice: <br />• Protect areas that are not to be treated from the effects <br />of ASOCRET-VK100. <br />• Protect exposed areas from wind and draughts. Cover <br />with polythene to prevent early water evaporation. <br />• Lower temperatures and cold gauging water delay <br />the strength development and decrease the flow <br />rate. Higher temperatures accelerate the strength <br />development. <br />Please observe a current EU health and safety data <br />sheet. <br />GISCODE: ZP1</p> <p>This technical data sheet is a translation from German and does not consider local building codes or legal requirements. It shall be used as general reference for the product. Legally binding <br />is only the latest German technical data sheet or the latest data sheet from one of our foreign subsidiaries inside their sales territory.</p> <p>2/2</p> <p>SF/CoS/TM</p> <p>04/17</p>
