ASOLIN-SFC45 TM GB_1515.pdf
1 စာမျက်နှာ
39.6 KB
Download
<h1>ASOLIN-SFC45 TM GB_1515.pdf</h1> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2–8 <br />D-32760 Detmold (Germany) <br />phone + 49-5231- 953-00 <br />fax <br />+ 49-5231- 953-108 <br />email export@schomburg.de <br />www.schomburg.com</p> <p>Technical Data Sheet</p> <p>ASOLIN-SFC45 <br />Deep penetrating hydrophobic façade cream</p> <p>Properties: <br />• Ready to use. <br />• For a very good water repellent effect. <br />• Optimum penetration. <br />• Dries to a non-sticky finish. <br />• Water vapour permeable. <br />• Improves the resistance to aggressive media. <br />• High degree of resistance to frost and de-icing salts. <br />• Spray, roller or trowel application. <br />• Especially clean and almost loss free application.</p> <p>Art.-No. 2 01247</p> <p>Substrate preparation: <br />The substrate to be impregnated must be dry, sound, <br />load bearing, open-pored, clean and free from <br />separating substances such as oil, grease, moss, algae <br />or other contamination. In each case a professional <br />assessment of the substrate and preparation is <br />necessary. It must be guaranteed that water and salts <br />dissolved within it cannot permeate from the rear of the <br />hydrophobic zone.</p> <p>Method of application: <br />Apply ASOLIN-SFC45 with suitable spray equipment <br />(e.g. airless spray), brush, or lambs wool roller. The <br />material should be applied as an even white and antisag film at the desired thickness. This film is taken up <br />by the substrate and remains visible for about 10 to <br />30 minutes and transforms into a clear gel during this <br />time. A few hours may elapse before this process is <br />complete and is dependent on the weather conditions. <br />Technical Data: <br />ASOLIN-SFC45, depent the substrate impregnated, has <br />Basis: silane cream <br />a slight to intense colour enhancing effect, which can <br />Colour: antique white be transitional or long lasting. We recommend that an <br /> (transparent once dry) <br />appropriate trial area is carried out. <br />Density: <br />approx. 0.84 kg/l <br />Consistency: <br />creamy, pasty <br />Important advice: <br />Consumption: <br />dependent on the substrate, <br />• Protect areas, which are not to be treated with <br /> <br />approx. 0.1 – 0.2 l/m2 <br />ASOLIN-SFC45. Protect and cover adjacent surfaces <br />and building components that shouldn’t come into <br />Substrate/ <br />application temperature: +5 °C to +35 °C <br />contact with the material e.g. windows, doors, glass <br />Cleaning: <br />whilst still wet with water <br />areas as well as plants. <br />Packaging: <br />2.5 litre, 10 litre, 20 litre <br />• When using to refresh already hydrophobic areas, <br /> containers <br />tests are required in order to exclude potential crossStorage: <br />frost free, 12 months in the <br />reactions with the existing hydrophobic material. <br /> <br />original unopened container. <br />• Do not apply during rain or drizzle. <br /> <br />Use opened containers <br /> promptly. <br />Please observe a valid European safety data sheet. <br />Areas of application: <br />ASOLIN-SFC45 is used for the water repellent <br />impregnation of vertical or steeply sloping surfaces in <br />porous brick, clinker, natural stone, lime-sand blocks, <br />mineral-based renders and concrete substrates. The <br />material cross-links in the interior of the appropriate <br />substrate to a deep water repellent barrier.</p> <p>This technical data sheet is a translation from German and does not consider local building codes or legal requirements. It shall be used as general reference for the product. <br />Legally binding is only the latest German technical data sheet or the latest data sheet from one of our foreign subsidiaries inside their sales territory.</p> <p>1/1</p> <p>15/15 SF/CoS/JD</p>
