back

AQUAFIN-1K

Mineral waterproofing slurry

Print page

Product details

Description

  • Building waterproofing
  • Stiff waterproofing slurry
  • Resistant to concrete-damaging water

Areas of Application

  • For waterproofing building components in direct ground contact
  • For waterproofing container constructions
  • As horizontal waterproofing to prevent capillary rising damp
  • Resistant to negative pressure water
  • For walls and floors
  • For interior and exterior use

Advantages

  • Sulfate resistant
  • Water tight
  • Light, economic application
  • Can be painted, spread and sprayed
  • Adheres to damp substrates without primer
  • Vapour permeable
  • Frost resistant and ageing-resistant

Consumption:

approx. 3.5—4.5 kg/m²

To the calculator

Article-No. Color Packaging size Unit/Pallet
204248-003 grey 25 kg/bag 42
204248-001 grey 6 kg/bag 160
204248-004 grey 5 kg/bag 160

Downloads

Additional Technical Information
Brochures
AQUAFIN-1K – One component mineral based waterproof slurry – «Negative waterproofing!» AQUAFIN-1K – One component mineral based waterproof slurry – «Negative waterproofing!»
Building restoration - Requirements. Methods. Products. Building restoration - Requirements. Methods. Products.
Cementitious waterproofing slurries in waterproofing Cementitious waterproofing slurries in waterproofing
Planning and application guide book Constructive waterproofing & restoration works Planning and application guide book Constructive waterproofing & restoration works
Environmental Product Declaration (EPD)
Modified mineral mortars, group 1 Modified mineral mortars, group 1
Safety Data Sheet (SDS)
AQUAFIN-1K AQUAFIN-1K
Technical Data Sheet
AQUAFIN-1K AQUAFIN-1K
Technical Drawings (DWG)
1-70-7 Waterproofing on crack-prone substrates with subsequent floor levelling for mechanically stressed areas 1-70-7 Waterproofing on crack-prone substrates with subsequent floor levelling for mechanically stressed areas
1-70-8 Waterproofing on non-crack-prone substrates with subsequent floor levelling for mechanically stressed areas 1-70-8 Waterproofing on non-crack-prone substrates with subsequent floor levelling for mechanically stressed areas
Technical Drawings (PDF)
1.2.5 Pipe penetration waterproofing with COMBIFLEX-High Build System 1.2.5 Pipe penetration waterproofing with COMBIFLEX-High Build System
1.70.7 Waterproofing on crack-prone substrates with subsequent floor levelling for mechanically stressed areas 1.70.7 Waterproofing on crack-prone substrates with subsequent floor levelling for mechanically stressed areas
1.70.8 Waterproofing on non-crack-prone substrates with subsequent floor levelling for mechanically stressed areas 1.70.8 Waterproofing on non-crack-prone substrates with subsequent floor levelling for mechanically stressed areas
2.40.1 Retrospective inner waterproofing 2.40.1 Retrospective inner waterproofing
2.50.8 Internal waterproofing and horizontal barrier from outside 2.50.8 Internal waterproofing and horizontal barrier from outside

References

Mövenpick Hotel, Vietnam
More…
Sundance square, fountains, USA
More…
Terra Plaza restaurant in Bacolod City, Philippines
More…
Water treatment plant in Petersburg, Virginia, USA
More…
Water feature, Tarrant County College, Texas - USA
More…
5 star hotel in St. Truskavetz, Ukraine
More…
Aga Khan University Hospital, Karachi, Pakistan
More…
Farmstead in Bocholt, Germany
More…
Club house and swimming pool in Iloilo, Philippines
More…
New construction project - Wiesbadenbrücke - Germany
More…
Średnia Krokiew ski jump in Zakopane
More…
Cellar restoration in Büren, Germany
More…
Residential building in Duisburg, Germany
More…
"The dancing elephant" revitalization centre in Venlo, Netherlands
More…
Mann Hann residence in Alvonso, Philppines
More…
Primate Center Goettingen, Germany
More…
Vijuš swimming pool complex in Slavonski Brod, Croatia
More…