Installation of large format tiles and boards on wood substrates

A particularly rapid, easy and water free solution for levelling substrates is offered by the lightweight epoxy screed ASODUR-LE. When installing large format tiles with an edge length over 40 cm and a surface area over 0.18 m², we recommend the following construction build-up.

Print page

Universal epoxy based primer

In rooms in which AgBB regulations apply, prime with the binder from ASODUR-LE


Lightweight epoxy screed


Flexible, mineral-based, vapour permeable waterproof slurry for areas with increased demands in interior and exterior areas

One component flexible waterproof slurry, wall/floor

Fabric reinforced sheet style bonded waterproof membrane


Grey, highly flexible adhesive for interior and exterior use

Lightweight, low dust flexible adhesive for thin, medium and thick bed installation techniques

Rapid hardening, ductile flexible adhesive S1 for interior and exterior use

Polymer dispersion


Rapid hardening flexible grout, 3 – 20 mm joint width

Mineral-based multi-function flexible grout for tiles, natural stone and other finishes from 1-10 mm joint widths with FAST TECHNOLOGY

Silicone sealant for movement joints

Silicone sealant for discolouration-free elastic jointing