Installation on lime sand blocks, bricks and aerated concrete masonry work

Blocks with binders (e.g. lime sand blocks) must have reached an age of at least 6 months before tiling (6 months after the production of the block) in order to prevent damage to the tiles, which can be traced back to shrinkage stresses.

Print page

Solvent free universal primer, water and alkali resistant


Non-sag, cement-based, rapid hardening, polymer modified, low shrinkage and creamy smoothing compound, 2 – 50 mm


Flexible, mineral-based, vapour permeable waterproof slurry for areas with increased demands in interior and exterior areas

One component flexible waterproof slurry, wall/floor

Fabric reinforced sheet style bonded waterproof membrane


Lightweight, low dust flexible adhesive for thin, medium and thick bed installation techniques

Highly deformable flexible adhesive for heavy duty areas

Grey, highly flexible adhesive for interior and exterior use

Flexible natural stone adhesive


Simple to use grout, up to 6 mm joint widths

Rapid hardening flexible grout, 3 – 20 mm joint width

Mineral-based multi-function flexible grout for tiles, natural stone and other finishes from 1 to 10 mm joint widths, with FAST TECHNOLOGY

Silicone sealant for movement joints

Silicone sealant for discolouration-free elastic jointing