Share this page
back

Installation on concrete (> 6 months)

Before waterproofing and tiling concrete substrates it is mandatory to prepare the substrate using shot blasting, high pressure washing or similar techniques in order to remove laitance layers present.

Print page
PRIMING

Solvent free universal primer, water and alkali resistant

WATERPROOFING

Flexible, mineral-based, vapour permeable waterproof slurry for areas with increased demands in interior and exterior areas

One component flexible waterproof slurry, wall/floor

Fabric reinforced sheet style bonded waterproof membrane

TILE INSTALLATION

Creamy consistency flexible adhesive S1

Rapid hardening, ductile flexible adhesive S1 for interior and exterior use

Accelerated hardening flow bed flexible mortar

Flexible natural stone adhesive

GROUTING

Rapid hardening flexible grout, 3 – 20 mm joint width

Mineral-based multi-function flexible grout for tiles, natural stone and other finishes from 1 to 10 mm joint widths, with FAST TECHNOLOGY

Silicone sealant for movement joints

Silicone sealant for discolouration-free elastic jointing