Waterproofing and installation in milking parlours

Milking parlours when correctly installed to suit demands should help a smooth continuous and efficient milking process to be carried out. The use of anti-slip tiles, which are safe underfoot meets the intense requirements for cleaning and hygiene. The bonded tiled system must also be highly resistant to chemicals and mechanical stresses.

Print page

LEVELLING

	When levelling is required a cement replacement system can be used together with a bonding agent	ASOCRET-BIS-5/40
	Alternatively a bonded screed together with a bonding slurry can be installed	ASO-EZ4-PLUS

PRIMING

Epoxy resin-based barrier primer

ASODUR-SG3-thix

WATERPROOFING

The waterproofing is carried out with different colours of the chemically resistant polyurethane waterproof membrane ASOFLEX-AKB with ASO-Joint-Tape-2000-S. The last coat is sanded with quartz sand.

TILE INSTALLATION

Epoxy resin-based, chemical resistant thin-bed mortar

GROUTING

	Epoxy resin-based, chemical resistant grout	ASODUR-EKF
	Chemical resistant fine grain epoxy grout, 3 component and solvent free	CRISTALLFUGE-EPOX
	Polyurethane sealant for heavy duty movement joints	INDUFLEX-PU