back

Installation on green cement-based screeds (CT) and concrete (> 28 days)

Through the use of the highly flexible tile adhesives UNIFIX-S3 / UNIFIX-S3-fast, tiles can be installed on green cement-based screeds as soon as they are ready for foot traffic. When installing on green cement-based screeds make allowances for the fact that the binding process of the screed is not yet complete and will consequently have lower strength. No heavy loads may be placed on the substrate. Laitance layers must be removed before tiling. When installing natural stone, only use materials which are not sensitive to discolouration or deformation.

NOTE: This type of installation does not conform to recognised technical regulations and is to be contractually declared separately.

Print page
WATERPROOFING

Flexible, mineral-based, vapour permeable waterproof slurry for areas with increased demands in interior and exterior areas

TILE INSTALLATION

Highly deformable flexible adhesive for heavy duty areas to compensate for substrate stresses

Highly deformable, rapid setting flexible adhesive for heavy duty areas to compensate for substrate stresses

GROUTING

Rapid hardening flexible grout, 3 – 20 mm joint width

Mineral-based multi-function flexible grout for tiles, natural stone and other finishes from 1-10 mm joint widths with FAST TECHNOLOGY

Silicone sealant for movement joints

Silicone sealant for use with natural stone